How to abandon gas

In the conditions of unstable fuel prices, many motorists prefer the installation of gas-filled equipment to their cars. Moreover, both injector and carburetor cars are suitable for this. In addition to explicit savings, when using gas as fuel does not have detonation, the car is formed significantly less, and it is necessary to change the oil less often than when working on gasoline. However, there are also disadvantages that sometimes force drivers to get rid of gas equipment.

Among the minuses of gas-filth equipment is a significant increase in the mass of the car, about 30-40 kilograms. The reducer must be regularly cleaned from condensate, and since gas equipment is in the car trunk, it takes a lot of useful space. In addition, in a strong frost, it is impossible to start the engine without gasoline. And the air filter will have to be changed in 3 times more often.

Weighing "for" and "against", did you still decide to give up HBO? Then you can remove gas equipment and use as fuel exclusively by gasoline. Before proceeding with the removal of the gas cylinder, make sure that all the cranes are tightly closed.

First of all, unscrew the tubes and start removing equipment in parts in such a sequence: gas valve, gearbox, cylinder, refueling device.

Next, remove the gasoline valve and resume the operation of the benzier.

From the carburetor, remove the sprayer and install the heat insulating gasket in its place.

Remove the hose and fitting on the intake manifold. At the hole in the collector, which as a result of this was formed, put the plug.

At the very end, we remove the wiring to the valves and the fuel switching button, which is usually located in the car.

Please note that for safety reasons, disassembly should be carried out in the open air, because when removing parts of the equipment in the tubes there may be a gas that will go out.