How to choose siding

Singing is considered a popular material that is used when the facades is trimmed to give them aesthetic species and protect the house from adverse factors. To see the house by siding will be able to every owner, but before it should be chosen correctly.

1
Types of siding

For the manufacture of siding, various materials are used: vinyl, wood, metal, cement, plastic. In addition, the range there are types of siding, imitating other materials, such as brick, stone or log, which allows you to create an expensive finish of the house without increasing its value. Consider more, what siding, the characteristics of each type, the medium of use.

Vinyl siding

Panels are made of PVC, have different size, depending on the manufacturer. The material repeats the facing made with a natural stone or wood of different rocks, and also mimic brickwork. The advantages of vinyl siding are: abundance of textures and color gamut, low weight, resistance to external environment and mechanical effects, environmental friendliness, availability, long service life exceeding the floor of the century. This material can be used in any climatic conditions - from -50 to +50 degrees Celsius. However, when installing vinyl siding, some inconvenience arise, namely, to take into account the linear expansion to prevent deformations caused by the temperature drop.

Wooden siding

Siding, which is produced from wood, is well dried and impregnated with high pressure with special antiseptic composition for protection against the reproduction of parasites feed on with wood, and the development of mold. The material is inherent in high thermal insulation properties, in addition, it is environmentally friendly. The surface is aesthetically attractive due to wood texture. However, wooden siding has shortcomings in the form of short-life, fire hazard, it is also characterized by a tendency to deformation. Its price is high. And in addition, the material needs periodic staining.

Metal Siding

Metal siding is represented by such varieties as zinc, steel and aluminum. The latter is very popular due to its appearance, similar to the wood structure. From the dignity of the material, durability should be allocated, resistance to weather changes in the temperature difference, strength. In addition, when installing metal siding does not arise problems associated with the development of mold and similar to the harmful microflora. Consider that aluminum siding is more deforming, if you compare it with steel and zinc, and after the formation of dents, the restoration does not work. In addition, any metal siding is subject to corrosion, it applies primarily to the places of cut and sections, where the polymer coating was separated from the galvanized layer.

Cement Siding

For production, high-quality cement is used, in addition, cellulose is added in the raw material. The material is similar to the decorative stone. Among its positive qualities, resistance to UV radiation and precipitation, strength and high reliability. Cement siding is a non-flammable material that does not represent interest to mold and fungus, does not rot and is well restored. However, cement siding weighs, which affects the installation - the procedure becomes more complicated, the need to enhance the finishing by creating a frame.

Ground Siding

For the cover of the base, a special siding has been developed, which is made of cement or PVC. Externally, a coating similar to a brick or stone is obtained. The thickness of the material is significant - about 3 mm, as it requires a close arrangement to the Earth and the impact of dampness, and it is not worth excluding mechanical damage.

2
Criteria for siding selection

When buying a garden, pay attention to such criteria that affect the quality of further finish:

Uniform painting. Color must be identical both outside and on the inside of the product. However, this rule does not apply to budget siding, in which the inner side is always lighter, as it uses less dye, respectively, the price of the material decreases. Therefore, if the color of the color is uniform, products can be taken.
The thickness of the panel. To evaluate it, pay attention to the side cut of the product. The thickness of the siding from the naiter to the lock should be the same. Otherwise, the stability of the material to the power loads and deformations is reduced. The same applies to the presence of "shells" on the surface. Remember that the big thickness does not speak of the high quality of the material. As a rule, siding has a thickness of 1-1.2 mm, the base panels are about 3 mm. In the case of other parameters, a change in the quality of the material is possible, up to the loss of its properties.
Holes for the Decision Elements. Remember that holes intended for fastening nails or screws must have the same size and to be one form. In addition, if the material is high-quality, then they are located on the same line. Their edges are smooth, there should be no roughness. If the holes are non-accurant, then the production of siding was broken by technology.
Package. The conscientious manufacturer never saves on the packaging. To protect siding from chips and prevent possible deformations during transportation, it is packaged in hard boxes made of cardboard. But in the case of using polyethylene packaging in the process of transporting and storing the material, defects may appear.
Manufacturer and warranty. When choosing siding, it would be nice to read feedback on a specific manufacturer on the network and extract the forums. Warranty on products, depending on the manufacturer, is 25-50 years. At the same time, you should ask the store on defects to which the guarantee is applied. Remember that incorrect installation is not included in this list, and the waves that occurred during the installation will have to be eliminated independently. In addition, be sure to buy components and siding of one manufacturer, since in this case you can also lose the warranty.