How to strip the house block house

Regardless of the material that was used for the construction of the house, the issue of external sheaving remains important. For these purposes, tiles, stone, siding, plastic products are used. But it is necessary to pay tribute to tradition - the tree is still at the peak of popularity, and with it and a block house. Today we will talk about the procedure for the cover of the house by a block house.

A block house is a wooden panel that has a convex front side. It can be used inside the house, and for the exterior decoration of walls, base and frontoths. Facing successfully imitates the surface of the log cabin. Often the panels are not made of wood, but from the material similar to it. You can wash a block house with any surface - from stone, brick, wood, reinforced concrete blocks.

In the wound of building materials, a block house is presented in several versions:

Panels made of natural wood. For their manufacture, mainly conifer breeds are used - pine, cedar, larch, in this case the material is characterized by high resistance to water, is not subjected to rotting and mold due to the presence of antiseptic substances in coniferous wood. To reduce the risk of ignition, the material is processed by fire impregnation. Also panels can be made from hardwood - oak, alder, birch, but they are expensive.
Panels from artificial materials, namely vinyl, in which plasticizers and protective firming components are added. Vinyl block house is stronger than wooden! It is inherent in the same advantages, as well as simplicity of installation and care of the surface, rich color gamut, which includes a high-quality imitation of the tree.
Metal panels. Such a block house is characterized by high resistance to corrosion and a democratic price. However, when contemplating the finish involuntarily comes a thought about an analogy with a production building.

Let us dwell on the technology of the house of the house with a wooden block house, since most often the owners choose it because of many advantages of such a finish: high strength due to the conditions of intense wood drying, resistance to deformations, solar radiation, adverse weather conditions, low temperatures, aesthetic external view. At the same time, the load is small on the foundation. And if small damage arises, the problem is solved by the surface covering with paint or grinding. In addition, the lover is an additional insulation of the walls.

Choosing material, follow these recommendations:

Better shopping in a specialized store.
It has already been said above, which is higher properties of a block house made of coniferous wood - high strength and resistance moisture, so give preference to it. The perfect option is larch.
When buying, you need to make sure that the material is made of high-quality wood, it should not be wet. The permissible level of humidity is 20%, indicated in certificates for material.
See so that there are no bitch, choose a panel with a flat surface.
All panels should have one size, spikes and sinuses.
Carefully check the packaging integrity.
For outdoor work, a wide block house is intended, for the sheat inside the house - narrow.
The standard length of the panel is 6 m. But also a short boards are also available.

Before covering the house, a block house is necessary to conduct preparatory work, which are as follows:

To begin with, remember that the baptine panels are recommended only a year after the end of the construction site.
Before work, be sure to make a carpathist so that there is no cold in the house.
Further take care of the heat and vapor barrier materials, since the full-fledged trim is the so-called sandwich. Its layers: vaporizolation, dryer for insulation, thermal insulation material, windproof film, counterfeiting.
When finishing a wooden or brick house block, you can not use a vapor barrier film.
Plates of Minvati are best suited as thermal insulation material. When choosing, take into account the thickness of the walls: for example, for a wooden house, the thickness of the walls of which is 15 cm, a thermal insulation layer is 10 cm in size, an economical option - 5 cm.
It is also necessary to think about the thickness of the bars, of which the lamp consists, because the insulation will be laid between them. If the size of the plate is 5 cm, then the bars should be similar.
Windproof film is fixed to provide ventilation between insulation and clearance.

Features of the installation of block house:

When mounting the panel, place it so that the grooves is at the bottom, and the spike is at the top to eliminate the risk of moisture and dust in the groove and extend the trim service time.
When installing, leave the gap between the ceiling surface or floor and the trim to provide its natural ventilation.
The gap between the boards is needed to prevent their deformation in the event of a change in temperature and humidity.
To fix a thick block house, the self-sufficiency of anti-corrosion coating made from zinc is best suited. So on the board will not remain next traces of rust.

After performing the work, the surface must be protected from the effects of the environmental factors by means of primer, as well as painting or varnish coating. At the same time, it is also necessary to score the location of the panels, since the bands between the boards may appear due to further drying. It is necessary to cover the composition in 2 layers to keep the antiseptic properties longer. In the process of varnishing, after drying the first layer, swing the surface grinding to remove the pile raised and reaches the smooth surface. Such a coating is recommended to update once every 5 years.