Lining - Wooden Board Material, which is perfect for decorative wearing wooden houses. Make the lining of two types: from coniferous rocks of the massif (pine, death) and solid rocks (oak, alder, linden, maple, Siberian larch).
1
Before proceeding with the walls of the walls, you need to fill the rail on them, the distance between the bars and the mounting rails is selected, based on the thickness of the insulation. The insulation is usually placed under the lining, that is, between the grid and the wall.
2
Attaching the bars across the edges using a plumb and level, fix the mounting threads, then on them we carry out the installation of other bars. The carrier grille is obtained - aligned surface.
3
Now it's time to insulate the walls, often resort to materials from foam, polystyrene foam or mineral glass. The last raw material is better, if the house threatens rodents. When the sauna or bath is trimmed, it is better to use mineral wool or foil.
4
On the mounting grille, put the parobararier - a special film that will protect against moisture and rotting process. To the insulation, put the film with a smooth side.
5
Next, cut the loop with the bands of the required size, measuring the height of the trimmed section in advance. Fresh material directly to the wall with construction brackets or screws, or finish nails and kleimers to the mounting grille.
6
After the trim to obtain a chic species and durability, the lining should be covered with varnish or verses. To strengthen the strength of the coating, the trim must be covered twice. IMPORTANT: Between the first and second coating, give a lacquer-based basis.
The facade of the house with a lining trim gets a luxurious view, its color can be changed from the mood and taste of the owner of the house. In the bath to hide the lacken varnish is not recommended.
Share advice:"How to shelter the house with a clap"
0
1286
