How to shepherd balcony

Wooden lining is a profile board of certain sizes with a prepared surface and an end lock. Eurovantia is characterized in that it is produced according to standard dimensions: a thickness of 12.5 mm and a width of 96 mm, as well as a shape of a tongue that reduces the plating stitching.

The arrangement of the balcony begins with the calculation of the area of \u200b\u200bthe area and the acquisition of the desired amount of materials:

50x40 mm bars for guides - the total length is calculated based on the step of 500-600 mm;
Fasteners for timber - dowel 6x120 mm or galvanized plates, if the walls on the balcony are made of steel frame;
Lining - 10-15% on trimming and fitting are added to the calculated area;
30 mm nails with a small hat, wood screws;
Film for waterproofing.

Pine boards when heated by the Sun is isolated by the resin, this shortage is deprived of deciduous rails. The surface of the lining variety and does not require grinding, varieties in and cheaper, but need to be finished.

You will need a tool:

Drill drill, drill;
Hacksaw or electrolybiz;
Screwdriver;
Level, roulette, twine;
Hammer, ax.

Balcony walls are pre-prepared - purified and closed with waterproofing.

In the length of the guide rail, the holes are drilled after 70 cm, through which the places of installation of the dowels are marked on the wall. Using the bora, the deepening is performed, the bar is applied to the surface and plastic rods are inserted. The screws are first tightened not to the end - finally rails are tightened after alignment using wooden wedges. The first and upper guide are mounted, the rest positions are determined by the stretched twine.

Sewing the room starts from the ceiling, then go to the walls, and the last discharges are separated. Complete the operation of the installation of plinths and platbands. Calculate the lining can be cloging with a hammer of nails in a groove and deepening their dog caps, but it's easier and more careful to use the clammers - curved strips with a holding bracket and fastener holes. The first board is vertically placed in the corner and nailed on both sides. Subsequent inserted crest in the grooves, bubble with rubber hammer and fixed with nails or clamps.

The wooden lining of the non-insulated balcony is processed by the bioprotective compositions "Sezheng", Lignofix Top or the like. To decorate the surface, simulators are used, colorless varnishes or enamels.

Installation of plastic lining is performed similarly. The advantages of PVC panels are not rotating and easy to care, disadvantages are materials of artificial origin and fragile at negative temperatures.