The tree is the perfect material for building the walls of the bath. It is well kept warm, absorbs excess moisture and, with proper processing, is little exposed to the effects of dampness. The log cabin is easily mounted and fits perfectly in any landscape, bringing all the charm of the use of the Russian bath to your life.
1
The water cut is based on a wallable crown - the very first crown of logs laid on the foundation. It affects this part not only the strength of gravity of the whole building, but also the increased humidity of the concrete foundation. Since replacing the busting crown without dismantling the whole building is extremely problematic, it is trying to protect it in every possible way from the impact of negative factors. One of the tools of protection is the laying on the foundation of the moisture resistant lining. Most often this board is a thickness of about 40 millimeters, processed from three sides by bitumen mastic. For the impregnation of the tree, the domestic MASTASTI IBPH "Legend-Up" primer or "BKP-200" is best suited. If you have no such materials at hand - use a rubberoid folded in several layers. To ensure a tight fit of the groin crown to the lining, oversight log on one side. The density of the wall laying determines the holding of heat inside the building - one of the key factors guaranteeing the construction of a good bath.
2
The remaining crowns of the church are stacked on the shrore. Installation of logs should be carried out evenly throughout the perimeter. If the log house is built out of the logs of different diameters - the basis of the mounted thicker, gradually moving to the thinnest. All the cracks between the logs must be done with the help of MCH, packle or a special insulation, for example, the "escape" or YRSA. Collecting a few crowns, make a protective tide, which prevents moisture from entering between moisture-resistant lining and the first crown of the church. For this, the steel strip is best suited, fixed on the second crown and hanging over the foundation by 50-70 millimeters. Every 4-5 crowns check the vertical and horizontal frame plane. It is better to fix a little deviation at once, than noticing it at the very end, disassemble the log house and start all the work again. The logs of the first crown feed the antiseptic. For this, "Biosept" or "Pinotex" is perfect. End sections of logs Treat aqueous solution of acetone - it will stop their desalination. After that, heal them with PVA glue to prevent the evaporation of moisture from the ends.
3
To reduce labor costs, you can purchase a log house assembly. Buying such a structure, pay special attention to examining its walls and corners. Make sure that they do not have bosoms or deviations from the smooth perpendicular plane. The finished log house should be completely assembled from one breed of wood - according to carpenters, the homogeneity of the material increases its durability. Under the construction of the bath, it is desirable not to use the wood of coniferous rocks, since it is more susceptible to rotting than larch. Installation of the finished log on the foundation takes only a few hours and it is produced using a crane. The only thing that is required for a quick installation is the foundation should accurately match the size of the cut and perfectly repeat its outline.
4
Operactions under the door and windows do after full shrink shrink. This will avoid curvature of the opening and skew the door or window. After that, you will be thrown on the floor laying and the construction of the roof. Insulated and wall sections from within, you can install inner partitions and the necessary equipment. Your bath is ready.
Installation of a church under the bath is a troublesome business, but worthwhile. If the joiner's skills are not alien to you - boldly fight for business, but if you are not fully confident in your capabilities - seek help from specialists.
0
1553
