How to make goal skills?

Each owner wants to live in complete safety so that no one can penetrate his possession, on his site or to him in the garage. For overhaul, it is necessary to think about installing the deposits. You can no special problems to buy these details in the store or make them to order. But it is worth noting immediately that the cost of such minor details will be considerable. That is why, let's consider today how to make a deposit for the gate yourself without special spending and problems.

1

Types of Casov

Someone may think that the manufacture of such a detail will take a mass of time, and forces will have to spend a lot, but fortunately, such an opinion is erroneous, so it's not worth bothering about the time spent, because it takes it not so much Yes, and the process of creating a high-quality basement should not be called too complicated.

In addition, it is possible to make and establish the goal on the gate after the latter have been installed. That is, first the gate is installed, and then, based on their parameters and power, you can make reliable laws.

Immediately, I wanted to say that today there are a lot of discs. They differ among themselves by:

• closing options
• form
• designs

The most common options are:

• sliding
• swearing
• breaker

Each of the presented options has a number of features, disadvantages and advantages, so that in order to determine exactly which one you need, you need to know about each of them in more detail.

2

Installation Castov

In fact, the deposits are not very complex according to the design details, which is why anyone who will make this goal can cope with their installation. And let's start our consideration with the grazing, which has the name "turntable":

• Most often, such a goal is solved to install on the gate of a bivalve type.
• This model is easy to do, so the independent manufacture is welcome in this case. No complex elements in the manufacturing process will not need.
• Security indicators of such core are at a high level.
• Apply very often, because its design can be considered very simple and uncomplicated, and efficiency is at the height.

The process of installing the table under consideration occurs according to the following scheme:

• In order to implement the process of installing the species under consideration, you will need to have a tree bars under hand. They will need 3 pieces, and the thickness of the bars should be at least 50 mm.
• The length of one of them is desirable to be 1.5 meters, but two others - 55 cm. Long bar will eventually play the role of part that moves.
• Two identical bars are attached to one of the doors of the gate, and their location should be so that they look at each other and were on the same level.
• Here, we note that the fixed parts under consideration are needed very hard, so it will be necessary to drill through holes to carry out such attachments and use large bolts.
• The bars from the tree is not the only option of the attachment element to the goal. Here you can also use the parts made of metal, for example, profile. In this case, you will have to attach it to the gate by welding.
• In your queue, the bar which moves to be attached to one of the edges of the sash. An excellent device for this will be a bolt with washers. It should be understood that this item must be mobile, and therefore not limited in its movements.

3

Production of sampling

Let's consider the process of creating a basement with a locking mechanism. The mechanism under consideration is most often used if there is a sufficiently high gate of metal on the site. Making such a goal is very simple, so you can try to make it right now:

• First, to the top of the box you need to fight your finger, which is the valve, the diameter of which is not less than 15 mm.
• For the welded first finger, it is necessary to start the second one, but the curved to be installed on the stem of an anchor type. Now the constipation will need to close.
• In order to secure the anchor rod, you need to spend a small piece of pipe in the upper part of the diameter you need, but the second similar piece should be fixed slightly lower than the middle.
• When the rod is welded to the bottom of the bottom tube, the anchor will be able to rotate to rotate in this design as if the delivery.

• The next step in the manufacture of the design under consideration - in the stem of anchor type it is necessary to make a propyl (the easiest way to do it with a grinder). There you need to insert a plate of metal (rotable), securely secure.
• Now you need to make a hook on the second sash. It is for him in consequence and will start during the closure under consideration of the Kanenaya plate.

Casov for gates ready. Now you know that you are not difficult to make such a design, most importantly, have all the necessary details and tools at hand.