Fishing - how many men, and sometimes women are passionate about this occupation. Someone catches fish for fun, and for someone it is an additional or major earnings. Let's consider in detail today how do you make your hands to fish for fishing and find out what kinds are. You often ask the question about feeding feeders for feeder fishing, it is this question that we will find out more.
The advantages of making feeders do it yourself
First of all, it is necessary to understand that, in fact, the feeder is a consumable material, and no more so, so that its aesthetic qualities are not important at all in this case. As it turns out, fishing feeders can be made from a bottle of plastic or hair curlers.
Let's find out to start the advantage of the product under consideration:
- time for making a form for low tide goods products will be required
- possing the shape and the necessary weight of the feeder is very simple, can cope with this process for everyone
- the material for the feeder is inexpensive, so the manufacturing process can be called with confidence economically beneficial.
In order for the creation process to be simple and rapid, it is necessary that all the necessary materials and tools have turned out to be at hand:
- Metal grid (you can buy this in any building type or shop for a beekeeping). In this case, it is recommended to buy a wiring with a diameter of 0.7 mm.
- A piece of metal that will need for sore (you can redtress or tin)
- Wire. It must be flexible and soft enough, with a diameter of 0.8 mm
- Tin, which will be needed for a form, thickness in this case 0.7 mm
- Scissors for metal
- Passatii (you can also use pliers)
Self-casting form
When you start making a form, it is necessary to pour several feeders at once, not one. Experienced fishermen do not what a couple of pieces, but a whole dozen. It should be understood that most often the fishing occurs in extreme conditions, and not in perfect, so that in one pond can not be left and not even three feeders.
It is better to fish there, where you can hide well from predatory fish, and these are places where a lot of Kamaga, a reed, and other obstacles, for which the feeder can cling and, accordingly, remain there forever.
So, from the above, you can make the following conclusion - the form is obliged to be strong and durable to ultimately you could make a lot of feeders in it.
So, the manufacture of the shape occurs as follows:
- We take a metal grid that you have prepared in advance and cut out the workpiece (a stardar blank 13 * 3 cells).
- Two cells from 13 need to leave for casting feeders, and others will be needed to form a direct feeder.
Cargo for feeders
In principle, if you are fishing for a long time, you at least once, but poured the cargo, if it is going to make a newcomer - then detailed instructions to help you. First of all, it must be remembered that the process this reproduce is very neat. It should be understood that the hot metal it can cause serious harm to your skin.
First of all, the form for casting is dry and clean design. In order for the metal to be able to melt, it is preferably to cut it very finely. To melt the metal, you can use the gas burner.
After you have paid the feeder until the metal is completely frozen, you can specify the weight of this device. You can do it with a nail or ordinary wand. It is clear that before that, it will be necessary to accurately weigh the feeder.
If you love everything beautiful, then you can transform a little ready-made feeder. To do this, you can paint them some bright paint or apply the surface paint onto it.
It is also necessary to remember that the manufacture of a feeder and casting form must be performed in a well-ventilated room, and the perfect option is to get out and produce this process on the street, then you definitely do not spoil any piece of furniture or flooring.
Fishing Feeding Rules
So, to start the manufacture of the adaptation under consideration is necessary from the choice of metal. If you can not decide on your own, here's a standard example:
- It is necessary to take a tire of metal 60 by 80 mm
- Thickness in this case should be 16 mm
- Do not forget also about an additional piece of metal, the size of which should be 40 for 80 mm
- the thickness of this piece should be at least 7 mm.
Do not forget that the metal being considered should be soft enough so that it is prose to melt.
The next step in this process will become two blanks, the size of which will be 30 per 86 mm and 60 per 80 mm. It is necessary to put the blanks in such a way that two parts are outside, but the additional details will be central. In length, they must be 84 mm.
The billet auxiliary type is necessary in order to make the shape of the elips-shaped form. The fisherman should understand that this form is the optimal option for fishing, because it is suitable for the most diverse conditions of the process under consideration.
Now you know how to make a feeder for fishing and what you need to know that the result of your efforts turned out to be excellent. There is nothing complicated in this process, so do not be afraid to experiment.
0
293
