How to make gloss?

Experienced fishermen do not observe that fishing equipment, even the smallest thing, worth a lot of money. Experience shows that most small devices can be made with their own hands, save and get a high-quality and practical tool for fishing. Let's figure it out today in how to make it brilliantly and find out what it can be done and how.

1

Advantages of independently manufacturing brilliants

No one suggests that in the market you can not find cheap gloss, but most likely, its quality will be desired, so it is not necessary to be kept on too cheap product. The best option will independently make gloss to be confident in its practicality and quality characteristics. In fact, the independent manufacture of the tool under consideration for fishing has a number of advantages that we now and consider:

• The manufacture of brilliance with their own hands the process is very simple, so there will be no problems with this item.
• Costs will be minimal, because most of the parts may be at your hand and will not need to be purchased at all.

• You can use various parts to create browsing, which seemed useless in everyday life.
• In this process, there is where to raise your imagination, because you can create a unique item for fishing.
• Minimum production time. Many of your time you do not have to spend on its manufacture.
• The ability to make several options at once to determine which one is more convenient and practical.

If the process under consideration to approach with all seriousness and responsibility, then you can get glitter than no worse than the brand name, which is sold in a specialized store.

2

Production of "torpedo"

To begin with, you can try to make a universal model of glitters, which, in principle, can approach the most different conditions of your fishing. In the people, it is called "torpedo", because her immersion in the water is vertically, and it can already play with a small speed of wiring.

For the manufacture of this detail, you will need the following materials and tools:

• Paste GOI
• Metal sheet (preferably thin)
• Wire
• Verlutug - 2 pcs
• Ring - 2 pcs

It is worth noting that the wire, like a metal sheet, should be made of stainless material, because our fixture will be used in water.

When all tools and materials are at hand, you can proceed to the direct manufacture, which is produced in several stages:

• First you need to draw a template for which the shape of the gloss itself will be carved. Cut aluminum item must be carefully, so you first draw the shape on the cardboard (it must be thick enough) and only then transferred to the billet from aluminum.
• Do not forget that the workpiece must be folded twice so that our glitter is symmetric.
• If, after cutting, the part will work with defects or some kind of irregularities, it will be necessary to remove their sandpaper.
• Now we go to the attachment of the fastener itself, which consists of swivels prepared in advance. These parts are soldered to the gloss and join the copper with the wire (it can also be replaced with a string from the guitar). Immediately it is worth noting that the parts to be soldered to the aluminum part will not be so simple.

• Having done all these operations, we get ready-made glitter, and in order for its species to become more aesthetic, we proceed its paste ga (polishing agent). Some fishermen are confident that the attachment of the swivels directly to the bridge can end the scope of the fishing line and therefore the optimal option to install crown rings on the gloss.
• The resulting brilliance is considered universal, and for its manufacture you will need no more than 1.5 hours.

3

Blossy fluctuating

Also, fishermen are often used by the brilliance, which the people are called "Carasem". The characteristic features of such brilliance is her game, which perfectly attracts predators, and therefore the probability of good catch becomes higher at times.

Necessary materials:

• Metal plate
• Copper cut
• Ring for fasteners
• Hook

From the tools, we will be useful to drill and skillful hands of the master.

The manufacturer is as follows:

• As in the first case, you need to draw a template. In this case, it will have the shape of a rhombic, whose size determines the master itself.
• Gently cut out this figure in a piece of copper, after which it is necessary to have a plate of metal to the bottom edge (the parameters of this figure should be as small as possible).
• Now we solder the hook to our future gloss, after which the ring is made in the upper part, so that the line is made there, and for this, a small hole is drilled in this part (here for this we needed drill it).

Now in the hands of our finished brilliance, which is simply, and practicality does not accurately take it. Production of glitters at home is a way to save money and get excellent fishing devices.

In this case, you will not need a lot of materials and tools, and therefore costs will be meager, and in some cases, in general, equal to zero, because most of the fishermen in the toolbox or garage there is a metal plate. And the iron cover from the bottle and drill, with which you can make a hole in the homemade gloss.