How to make a Christmas tree from Mishura do it yourself?

Many things seem difficult until you try to make them yourself, so, even beautiful crafts do not at all, if you know what to do and how. Let's talk today how do you make a small Christmas tree from Mishura. You can send such a crawler to the exhibition in the garden to send and decorate your interior. It all depends on your desire, so each can cope with the detailed instructions for this purpose.

1
Tools and material

In order for the Christmas tree to get neat and beautiful, you must first prepare all the necessary materials and tools and only after that begin to the immediate manufacture of the crafts itself. Materials are the simplest, elementary tools, so most of them you can find at home:

Mishur - In this case, it will be enough for us and 2 meters
Watman - white without stripes and drawings on it

Glue - In this case, we will need two types of moment and ordinary PVA, because different materials are glued differently (but if suddenly under your hand will not be the moment, nothing terrible)
Scissors (the Christmas tree will be small, so it will be convenient to use medium-sized scissors)
Pencil - sharpening it needs to be pretty, to leave thin lines on paper)
Needle and thread - in this case, the color does not matter completely
Tassel - better to be somewhat, they will use us for applying adhesives for materials

As it became clear from the above materials, there will be no problems with their search, most likely, almost all tools and materials you can find at home, you will have to buy only Watman and Mishur, perhaps.

Despite the fact that the snaps are quite simple in the manufacture, you should not forget that everything needs to be done neatly and right, then every thing made by you will be high-quality, and in this case, the fake will be very beautiful.

2
Production of crafts

If you have a detailed instruction on the manufacture of Christmas tree from Mishura. Be sure that it will work perfect and very unusual:

At first, we take Watman and draw a pencil on it very neatly a circle, the radius of which should be 25 cm. An excellent tool for this will be a circulation, with which you can make an ideal circle. If the circulation did not have a house at the time of the manufacture of the crafts under consideration, then you can draw a smooth circle as follows - threads to have a needle, the length of the thread must be 25 cm, we will bring a pencil to its end. We insert the needle in Watman and draw the circle of the diameter we need - everything is elementary and simple.
It should be noted that in order to create a cone, which will be the basis of our Christmas tree, it will be necessary to use only half of our drawn circle. To begin with, cut out the entire circle completely, and then we cut it in at high spirits. You can immediately divide the circle into two halves and cut one of them, because the pencil print on the remaining Watman erase and you can use pure watman again.
That half of the circle, which turned out to be in hand and will be the base of the Christmas tree. In order to bind up this part, it is necessary to miss one part of the circumference with glue (in this case, the best option will be the "moment") and glue the free part of the semicircle to it. In the end, we get a cone, which will be attached to the subsequent tinsel and other decorations.
In our hands, we have a finished foundation of the Christmas tree, now it's time to stick to it prepared by Mishur cooked. For these purposes, the usual PVA glue is perfect. Starting with the tops, and smoothly descend on the base at the bottom. First, we smear the base with glue, and then Mishuur is fed to her, because Mishuru himself will be hard with glue, it will be difficult, so also not so effectively, now we leave our Christmas tree at rest about the complete drying of the glue. In principle, after the expiration of some time when the glue is completely dry. The Christmas tree can be exploited, because it is ready.
It turns out that in principle, it will take no more than 15-20 minutes to manufacture the crafts under consideration, depending on the level of your needlework. It turns out very simple, but the pretty tree. But if you want to improve this simplicity and bring it to perfection, it will be necessary to pay a little more time.

3
Christmas tree decoration from tinsel

So, the Christmas tree in Mishura is ready, now we begin to decorate her. For this, we will need the following materials and tools:

PVA glue
Sequins
Vata.
Colored paper
Thread and needle
Scissors

Half tools are already at hand, it remains to cook cotton wool, sequins and colored paper (the perfect option will be the red leaf). So, proceed to the decoration process:

To begin with, cut colored paper on smooth and small squares.
We take a thread and wind by her square in the middle, here such a simple maneuver, we get a small and neat bow. Fix thread so that the bow is not unleashed. Such a bows can be made a lot, at your discretion, after which we cling to the Christmas tree from Mishura.
Now, we tear away from a large piece of cotton wool very small, roll them into not very dense circles, slightly wrapped with glue, and then we sprinkle with multicolored sparkles, wait until the snow covered them and then cling to our Christmas tree.