Fishing is a passion for many men who love, in truth, courageous entertainment. Carp is a fish, which is constantly satisfied with hot experienced fishermen, but also not experienced you also want to try with happiness in this matter. In order for fishing and carp, you need to buy the tackle for this or make it with your own hands. Let's figure it out in more detail in how you can make a high-quality and practical tackle on carp.
Independent manufacture
In fact, not every detail and fishing device can be made with their own hands, because some designs cannot be repeated. So, you can make your own fishing items:
- opening methods
- cutter for carp
- equipment hair
- embossing feeder
It should be noted that the feeder is essentially the material of the consumable type, because several pieces of such fishing can be disappeared, because they are broken, cling, etc.
In order to make your own hands, a carp feeder must be done by the following manipulations:
- scissors (in this case, you will need a tool for cutting metal)
- drill (need the diameter of this tool equal to 5mm)
- awl
- form for lowrowing loads (it is desirable that this form is from such a metal like lead)
- solder tin tin
- pliers (if there are no such hands on hand you can also use nippers)
- soldering iron (it is desirable that it is powerful, such a device is easier to work)
- material for creating a fishing tool in question
The manufacturing process is as follows:
- Moving the weight, the size of which is reasonable to be 1.6 x9 cm, the thickness in this case should not exceed 4 mm.
- The optimal option is the ship, made of lead. In the event that it uses a metal mesh for the manufacture of a feeder, first the feeder itself is formed.
- After that, it is necessary to gently put it in the form prepared in advance and only after that it is worth pouring molten lead.
- Unforgettly about the fact that the optimal version in length in this case is no more than 6 cm.
Assembling feedushi
So, now it's time to collect in parts of our feeder, connecting all available elements among them:
- To begin, it is necessary to cut off the bottle of plastic or hair curlers so that the size of this part has become 5, if you decide to make a bottle feeder, you will have to cut it into small parts, the ideal sizes of which will be 13 to 6 cm .
- Now it is necessary to attach the vessel to the feeder, and it is necessary to do it from the outside, bending the ends of the weight of the weights in such a way that they are inside the feeder itself.
- Do not forget that all attachments should be done very tightly and correctly that the design is high-quality, it is because it will be necessary to press the pliers to press the edges of the weight.
- Now in the weight you will need to make a hole through so that you can install a ring type ring. Do it the easiest awesome.
- It's time to do the installation of a clockwork ring (it was to it that the swivel should be attached).
- In the event that the holes in the housing of the manufactured product did not seem, then it will be necessary to reinstate it with a corresponding tool - drill. The diameter of such an opening should be at least 6 mm.
If a construction grid of metal is used during the manufacturing process, it can be easily switched to a leader from lead. Fasten such a connection is needed by a soldering iron, ultimately you will not get a very strong design if you are fixing the items described above, but do not think that it will fall apart in your hands, it is enough for the first hooking.
Details Tackle for carp
To say that we can make the tackle with your own hands, it is impossible, but at the same time, if you explore the instructions and understand all the nuances of the process, you can even be an inexperienced fisherman to make the desired part for fishing. So let's figure it out from which details the equipment under consideration is:
- georgians (they can be a smooth form of different shapes, their composition also includes various fasteners)
- shock leader
- clip (providing security)
- raw materials required for leashes
- rubber limiters
- swivel (should be not one, it is very important here to have them on the stock)
- lead (necessarily it is reasonable to be not solid)
- adhesive substance (it is desirable that it was a glue of quick action)
- specials and Shilo Needles
- silicone tube
- threads and ribbons
Installation of equipment
I would like to start with the fact that the carp hunter should know a lot about this fish, because in order to catch it you need to know where it is found when and what you need to feed it. The fact is that this fish it can be both in the thickness of the water and at the very bottom of any reservoir, its location will depend on what weather conditions at the moment and, of course, the time of day.
So let's figure it out how to make a standard snap-in option for carp:
- When Karp saw the bait and had already managed to swallow it. You will see how it starts to move into one of the sides.
- At this moment you need to start slowly pulling a leash.
Due to the fact that he loaded heavy on the fishing tackle, there is a so-called self-segment, and that is why the hook is instantly dug into the lip folds of the carp.
This type of installation is the most common in the case when carp fishing is made from the bottom. In another case, it will not be possible to make a self-show.
0
268
