Bought a rod, coil, there are several types of bait and fishing line. It remains for small to go fishing. And if with the acquisition of all necessary for fishing it is easy to figure out, then how to wind the fishing line on the random coil - for a beginner spinning person, the task is complex.
If you have a new coil, most likely there are and instructions for winding the fishing line. But not always there everything is clearly described, the instruction in pictures is usually attached and first it is difficult to understand where to start. So that the first fishing is successful, it will take some more patience to learn at home to get out onto the coil of the fishing line.
How to wind the fishing line on the random coil. Step-by-step instruction
Winding Rules:
- You need to insert a coil into the rod.
- If your fishing rod is telescopic, then you will have to pull the whole stock for the fishing rod to be completely ready to catch fish. If you have a plug rod, then you need to connect in parts rod.
- Cook the fishing line to insert the most tip in the rods in the rods. You need to start inserting the fishing line from the rings of the smallest size, gradually moving to the base of the coil.
- Next, you need to remove the spool and tie around it (workspace) the fishing line. Tie a double knot so: fold in half the line, tie a nodule. If you doubt the fortress, you can make some simple nodules.
- Now you need to leave the lecturer rim to throw back to return to the spots, and the rim itself is returned to its original position.
- The fishing line is wound with a simple rotation of the coil. Just still have to maintain a fishing line and direct to control the winding density.
How to wind the fishing line on the random coil. Questions and answers
These answers will help you cope with the task without difficulty:
- if you work with a wicker fishing line, then under the place where the fishing line will be attached, you need to put a piece of the leukoplower or pour a small piece of soft or rubberized material (you can cut off a piece from the rubber attack). Now you can freely wind the fishing line on the coil and it will not slip off the spool;
- the fishing line must be kept under the stretch. Tension strength will have to control themselves. So as not to cut your fingers about the thin line, prepare the square of the soft tissue or use the gloves;
- if the winding is completed and the line is equal to the spools, then you will have to remove an excess one, approximately 1-2 mm from the sides. If the distance from the side is more and remains somewhere 5 mm of free space, it can negatively affect the casting range of the rod. To this not happen, it is necessary to use Becking (this is a winding under the working fishing line);
- for winding, a thin line is used, a diameter of 0.3 mm. If you take a thick life, then the winding can be uneven. It is impossible to use a kapron thread or cotton, because the material wets and will dry up for a long time - it slows down the process of fishing.
Storage at the coil wound
The storage of the coil prepared for fishing remains relevant, because after fishing usually the coil is simply folded into the box, and with the onset of the new season it is found that the fishing line for some reason deteriorated and rushes as a regular thread. This happens if a thin line of type "Mononi" was used. If you have a woven fishing line on the coil, then you can re-use it, only you need to turn it out before long-term storage and dry the fishing line. In order not to damage the spool with a wound fishing, additionally wrap it into several layers of wrapping paper or newspaper.
Before starting the new season, you need to rewind with the desired tension. And after each fishing it is desirable to rewind and dry the fishing line at least for a length or a little more casting.
0
518
