Despite the fact that modern interior solutions dictate their rules, so far, most people did not refuse the breadheads, which were invented many hundred years ago. If earlier it was standard boxes of wood, where bakery products were always kept, today it is a universal, practical and very stylish object in the kitchen. Let's talk about how to make bread with your own hands and understand in this process.
Preparatory work
Before you begin to make something, it is necessary that all materials and tools that may be needed in this process are at hand. In this case, the Master will also need a detailed drawing with all the calculations. For special craftsmen, the first phase of preparation is the creation of a layout (not a mandatory process).
So, for a start, we are determined with the main material that will be used for the manufacture of a bread box. The most common options today are the following:
- Wood
- Beresta
- Bamboo
- Plywood
The choice depends on the wishes of the manufacturer and its financial capabilities. Do not think that if you make a bread maker from a cheap material, it will turn out ugly. In fact, its appearance depends on the skill and desire of Cleells, but the quality characteristics, of course, from the material. Each of the above materials has its advantages and disadvantages, so that these factors should be considered when choosing.
All of the materials presented above perfectly pass the air, and therefore you can safely combine them with each other if desired. This ability is very important for the bread bed, because without entering it in it, everything that is stored in it will simply suffocate.
To connect parts, in this case, it is often used for joinery type or screws. If you have come up with the original method of opening and closing the door in the breadhead, then keep in mind that you can still come in handy canopies and handle. There are a few options for opening the door:
- in the form of shutters
- simple
- on the closers (extremely rarely used for this adaptation in the kitchen).
To execute the process under consideration, the manufacturer will need a standard carpenter and no more, that is, no additional expensive equipment and tools in this case will not need.
Wooden bread bed
If you have all the necessary materials and tools at hand, you will not make a special difficulty. If the source material for this subject you will choose a birch or a lipa, it will be the perfect option. It is not necessary to use pine for the purposes under consideration, because its specific smell for a long time will be absorbed by bakery products that you will be stored in the binice.
So, the manufacturing process is as follows:
- First, check out all the necessary parts and indicate the dimensions that must match each other so that the product will be correct and all the details approached it. All sizes can be selected in an arbitrary order (at the request of the creator).
- A nails for furniture or glue joinery can perform as connecting details, as previously said.
- In order for the parts to be as densely connected to each other, it is better to embroider the seams between them glue. We also do not forget that all connections if necessary, paper-type paper is processed.
- The door for the bread maker is recently manufactured. Today, the door-rolling door is most often used, which is made of flat and fairly thin fortune. This design of the bread box at the moment is considered the most relevant.
- Despite the relevance, embed such a door in the product more difficult than this. Compared to other simpler doors designs. In this case, you will have to create a mini-groove throughout the perimeter of the bread box (from top to bottom) in order to insert the driving door.
The advantages of the material under consideration for the crib is obvious:
- ecologicaly clean
- practical
- beautiful
- durable
If you didn't turn out to be under the hand of a tree or it seemed to you that it was too expensive material for the future bread bed, then we suggest to consider in detail the instructions for the manufacture of cribs from plywood.
Breadbox from plywood
The principle of assembling such a lender is similar to the previous option. All are also drawn details, then cut on ready-made drawings, the size of each of them is taken into account. The only difference in this case is the details of the plywood harder to process, because in the process of processing they can decrease, which makes it difficult to manufacture the design under consideration.
If you have the following tools at your hand. The process of creating a new plywood bread mines will be simplified at times:
- lobzik
- machine for grinding surfaces
- drill
After all parts are cut from plywood and processed, as it should be, you can proceed to direct assembly. In this case, the fasteners are carried out, as in the previous instruction - glue or screws (at your discretion).
After familiarization with the above information, it becomes clear that it's not so difficult to make a bread maker, as it might seem first. The most difficult process in this case becomes the manufacture of drawings, which will be cut out the parts under consideration.
0
344
