How to make a spinner of wood

Spinner - Hit 2017, bypassed the whole world and famous for his simplicity and uniqueness. But what if you do it manually? It was the matter that more and more people began to ask. In this article, we will consider full and detailed instructions of how to make an unusual, high-quality, and most importantly - homemade spinner of wood!

1
How to make a spinner of wood - materials for work

Drawing (take from google or draw manually).
A piece of plywood (6 mm thickness).
Lobzik.
Bearing (diameter 22 m).
3 stacks of 50-penny coins (used instead of three, all familiar bearings).
Feather (drill) by 20 and 22 mm.
Sandpaper.

2
How to make a spinner of wood - work

Stick drawing on Phaneur using ordinary glue.
Carefully cut the blank using a jigsaw.
Using a pen (drill) by 22 mm drill a hole in the workpiece.
For 50-penny coins, drill holes with a 20 mm drill on the sides (depending on the drawing of Spinner).
Collect 3 stacks of 50 penny coins of 5 coins in each stack and glue them with each other.
With the help of sandpaper, smooth out all the irregularities (before this it is necessary to separate the paper blank, glued at the very beginning of operation).
Paint spinner frame, with paint and brushes (optional).
Insert the bearing into the central hole of the spinner.
Insert 3 stacks with coins in the side openings 20 mm.
We check that everything reliably keeps.
That's all, the spinner is ready!

3
How to make a spinner of wood - tips and tips

To begin with, I would like to note that in the example it is shown how to make a spinner with three stacks of coins. Instead of coins, the bearings can be used in exactly the same way, while drilling a hole of 22 mm everywhere!
Where to buy bearings? Often bearings are sold in cymagazines.
What if the spinner does not spin and noise? In order for your spinner to become more quickly, it spinned longer and became silent, it needs to be washed in any solvent, such as acetone or gasoline.
For gluing the stack of coins will suit the usual superchalter.
You can fantasize with the drawing for your spinner.