Flluggers were quite recently incredibly popular in seaside cities. They can be found on the roofs of houses and other facilities of the Scandinavian countries and the former Soviet republics. So, for Amsterdam, Tallinn and Riga, Flywer and is at all a business card. The masters of their business turn the flugers into the work of art.
How to make a vane - materials and tools
Previously, the fluger was made of wood, but with time the metal became more popular. For this purpose, it is possible to use steel, but the sheet copper will be more successful. The fact is that it has a natural brilliance and is not corrosion. Copper fluger looks quite attractive. An important advantage of the copper design is a long life. Yes, you can use a tree, but under the influence of wind, precipitation and frequent temperature drops, it will quickly come into disrepair. Considering modern materials, you can choose plastic. He does not rust and very light. The plastic panels are comfortable, as you can cut the designed parts from them. Make a drawing on paper, it will help.
Making items, you can use even plastic bottles. Such a fluger is suitable for a cottage house, but not for a stylish cottage. Solid buildings need more expensive materials. In the manufacture of the weathering, you will need plug and carpentry tools that can be used to process plastic, metal or wood. Plastic and Phaneur are treated with electric jigsaw equipped with a special sawmill, a file and sandpaper. To do the holes, you will need a drill or screwdriver with drills.
Flyuger's support
Fulger support can be made from a pipe with a diameter of 13 millimeters and a long 125 millimeters. On one of the sides of the support, you need to cut the appropriate thread. Note, the size of the thread must correspond to the size of the lid. In the inner surface of the weather, you need to hind the bearing. Correct him correctly. To effectively fasten the fluger on the roof, you will need special fasteners - steel stripes. They must be fixed on the support. Please note these bands should not interfere with the fluger to rotate around its axis.
How to make a vane - body cover
There is no difficulty in making this lid yourself. You will need a steel billet with a thread sliced \u200b\u200bon the inside. This thread should correspond to the thread on the fluger support. The top of the lid is decorated decorative distinctive and the necessary element - the Rose of Winds. These are thin and long metal tubes, nor the ends of which are placed pointers of the parties to the light. Your main task is to prevent waterproofing of the fluger, so the cap is installed on top.
Production of Flyugra
It is manufactured with vane enforced enough. Wheel-made weather, it is already a work of art. Make it most often in the form of a bird. It has long been believed that the rooster is a healing hearth. Therefore, it is it in most cases and personifies the fluger. Everyone sees a bird in his own way. Therefore, you are guaranteed to enjoy the manufacture of a fluegra in the form of a rooster. It is necessary to use a stainless steel as a material. Fastening is made with bolts, and you can simply welcome it to the top of the pipe.
Installing Fluger
Having finished manufacturing, you go to a very important point - installation on the roof. Note, the fluger should be placed at least 10-T. meters above the ground. To perform the correct orientation regarding the parties of the Light, take advantage Compass. With welding or bolted connection, connect the steel wire with a diameter of 8 mm to the fluger. Her free end stick to the ground to the depth of 1.5 meters - you will get an excellent threshing.
To determine the wind strength, set the vertical, freely rotating plate on the fluger. Her deviation will indicate the strength of the wind. The main property of a properly manufactured and competently fixed floider is a continuous rotation around its axis, even with a unauthorized cutting of the wind. Follow our instructions and weather vane will be happy to please you.
0
833
