Chest came to us from the last century and has taken a worthy place in the modern decor. It is designed to store different things. Make an original chest with his hands. You will need a little bit of imagination and tools.
Do chest with his hands - what materials to choose
Make the product
- wood. On the pedestal you can sit in the hall or make the chest chest of drawers, and put a lot of things;
- plywood or chipboard. Put into the trunk children's clothes and toys and put the child in the room;
- of cardboard. Useful to ordinary cardboard box. The chest fold accessories and various trinkets;
- foam or polystyrene. A trunk can even hang on the wall.
Doing their own hands wooden chest
Prepare:
- jigsaw with a hacksaw;
- screwdriver, screws and screws;
- paint brush and a hot melt adhesive;
- construction glue gun;
- sandpaper, and clamps;
- paint, varnish;
- wooden planks. If the tree is not - replace the plywood;
- decorative loop.
First, good dry board to the next trunk is not cracked. Find a place for the future of the chest. Draw his sketch on paper and determine the size. Getting to work:
- jigsaws carved from wood blank of a selected size. It is advisable to first make a blank paper and attach to a tree, doing layout, and then cut. Billets - two lateral sides, the front panel to the rear, top and bottom;
- connect all four screws wall products. After tightening the screws fastening seat cover your overhead corners or under zashpaklyuyte tone wood;
- insert in the resulting box bottom and screwed to the screws strips;
- attach the cover. Can pre-fill board on part in the form of a semicircle. Decorative loop lock screws and connected to the lower part of the upper chest;
- use self-tapping screws for fixing the lock;
- proceed to the decorative design of the trunk. Good grind the surface and corners with sandpaper. Open the paint or treat the stain. Transparent topcoat underline wood structure, and paint tinting colors of give product. Upon request, draw a picture.
Use your imagination to decorate the finished chest. You can be ordered forged items, select them under the design of the product.
Doing their own hands chest made of cardboard
Pick up the cardboard box the size of a future product. Manufacturing Process:
- make a sketch of the product. In a circle, draw a pencil box two lines for cutting, on the sides of the roof to draw semicircles;
- a sharp knife cut away any excess cardboard from the end of bend and cut the top;
- construct lid cardboard box width, respectively. You connect it to the rear wall of the article of stationery clamps or screws and nuts made of plastic;
- connect the front lock body with its trunk lid;
- zadekoriruyte beautiful product. Obkleyte its dark stripes, wallpaper or color;
- attach the product handles on the sides.
Insert inside the box the other box, paste it, and chest becomes stronger.
Doing their own hands Chest polystyrene
Prepare polystyrene foam sheet. Draw on paper the details of the required size. Cut out the styrofoam parts. After cutting check that all matched and the future will turn even the chest. Assemble without fastening and see. Draw a screwdriver gently on the surface of parts straight lines that create simulated boards. Paint the inner surface parts with black paint and exterior - brown wood. Leave to dry. Dried components glue between a silicone adhesive. For decorating products include fantasy. You can paste over shells or draw the same polystyrene.
You make an interesting piece of furniture with his hands and a variety of design of any room. Experiment with materials, surprise yourself and family, make original and useful in the home product.
0
829
