How to make a small tiled oven?

Someone belongs to a tiled oven as a subject from the museum, and for someone it is the trend of the season. In fact, today tile furnaces are very popular, despite the fact that in terms of cost, this is a fairly expensive element in any house. Today we will tell about how to independently build such a furnace with their own hands, while saving money for money.

1

Advantages of a tiled furnace

Before you start creating such a structure in your home as a tiled oven, you need to make sure of its creation. So, for this, consider the preferential characteristics of the furnace under consideration:

• The head of the positive quality of the tiled furnace is the lack of need often to tram it
• Among other things, the energy saving coefficient is at a high level
• Because of its structure, the tile takes part in the heating process, while evenly and slowly moving the heat in which it is located.
• The long-term heat transfer of the furnaces in question can also be attributed to positive qualities, because with such a furnace in the room it will be warm throughout the day, even if the fuel did not twist in it.
• The mass of the stove cannot be called great, and therefore, the foundation for its construction will not be required, respectively, saving money and time is provided.
• Special care does not require and serve a long period of time, the only thing that will be done regularly, wipe the dust on the tile.

2

Features of masonry of tiles

The masonry of the ordinary stove differs from the masonry of the tiled furnace, and first of all the fact that in the second case, the tiles are installed first, and only after that the brick case is attached to them.

It is necessary to build the furnace under consideration. That is why the process in question is quite complex and time consuming, but it cannot be said that this mission is not fulfilled for a conventional average person without special knowledge and skills in the construction industry. If you follow the instructions and adhere to some rules, there will be no unrestalicable difficulties in the masonry process.

• Tiles, which are decorated with both fireplaces and furnaces, products are completely non-standard, so before starting the masonry of the furnace, it is necessary to sort the tiles, both in the color range and for defective damage, in the case of their presence.
• After the defective tiles are postponed to the side, it is necessary to adjust them all under one size and in this case this tool is useful as Bulgarian.
• If the masonry of the furnace and tiles occurs simultaneously, then for the best stickiness, a shamotless-clay solution is used, but if it was necessary to be tinted with an already finished furnace, then the adhesive solution is useful, according to the PROFIX type.
• For some, the variant of simultaneous masonry and bricks and tiles will seem difficult, so let's consider the process of masonry directly to the furnace, and after - the process of cladding it tiles.

3

Masonry furnaces and all nuances of the process

So let's figure it out with all the subtleties and stages of masonry furnace:

• First of all, choose a brick from which our stove will consist. An excellent option for a tiled oven will be a refractory brick.
• After the building material will be at hand, proceed to the masonry. We begin, of course, from the first row (in the hands of the builder already there must be a clear drawing of the future furnace with all sizes). An important nuance is to spend a lot of time to control the solution, which often falls on the outer part of the bricks, so, just get the paint tape on the front part, and there will be less than one problem.
• Remember, independently produce a solution for mounting bricks with each other, because the likelihood of longevity such a furnace is extremely small, so acquire a special solution.
• The construction of the inspections will be ideal only if for this you will use conventional corners of the metal (about 50 mm in size). Do not forget that there should be no corners on the front side of the furnace.
• If you are the first time you connect with construction works, then it is better to draw all the sizes of the furnace on the floor and on them already put the brick, a row for nearby, slowly checking the accuracy of masonry, evenness and other nuances.

• It is important to pay attention to the fact that the seam laying was accurate and even, for this you need to put a pair of rods from metal, 8 mm thick, and the solution is already superimposed on top of them, and only then the bricks are put.
• Pipe laying stands with special care, because the curves of the pipe is not only aesthetically not beautiful, but also such pipes do not serve for a long time, so keep in mind.
• After the furnace is laid out and no defects you will find, you can start the facing of its tile.

This process will not take you a couple of days, even if you call for helping neighbors. Do not even count on it. Best of all, if such a process you will be engaged on weekends, and even better on vacation, then you can pay enough attention to the masonry of the furnace.

To put the tiled oven is not a simple, but at the same time, the time you have spent on this process will be beneficial from all sides: economically, practically and in durability, because it will be for yourself.