How to make a plow?

How to make a plow?

Plow is a real assistant to work in the field. Buying the factory device will be in a penny, so many craftsmen try to make a plow alone. Before, proceeding with the work, you should understand that the process-consuming process itself requires elementary knowledge in geometry, experience reading drawings, cash and time costs.



1
Why do you need a plow?

The homemade plow can be attached to the motoblock and successfully perform all agricultural work. If such a device appears on the farm, it will greatly facilitate work in the garden or in the field. With the help of a plow, you can perform:

  • les of grass and weeds;
  • earth processing before sowing;
  • direct sowing;
  • hilling;
  • harvesting;
  • improving the aeration of land.



2
Dump for plow

The first thing you have to do is buy high-quality metal with which it will be easy to work, and it will not let go in the process of processing the Earth. Dump for a plow is a very important detail, from which the productivity of the entire device will depend on the whole. You can make a dump in several ways.

1 way:

  • 1 stage - on a metal sheet (sheet thickness of at least 3 mm.) It is necessary to cut the cylindrical surface of the dump (to facilitate the work, you can use a predetermined pattern);
  • 2 Stage - Circled Details Bending With the help of sheetogib (folding lines must be perfect, accurately match the form and size);
  • 3 Stage - modify the workpiece with a hammer, check the bends (to understand how the plow shape should be oriented to the template).

2 way:

  • Stage 1 - As a workpiece, it is necessary to use a steel pipe with a diameter of 600 mm. (the pipe can be taken and in a state of B.U., only treat it from corrosion); On the cardboard, cut out the template;
  • 2 stages - carry a template on the pipe (make sure that the longitudinal edge of the template makes an angle of 22-23 degrees with a longitudinal edge of the pipe);

3 way (you can apply if you have a mountain)

  • 1 stage - we make a workpiece of steel;
  • 2 stage - the workpiece is placed in the mountain;
  • 3 Stage - After heating the workpiece, the hammer to produce matrix bending.

3
We collect plow gradno

After you have done, you need to start assembling the device. During operation, you must focus on the drawing. Before starting an assembly, it is better to cut all the details on a dense cardboard and connect, so to speak, make a layout. If the layout coincided, and all parts correspond to the size and degrees of the corners, then you can proceed to the assembly of the device from metal blanks.

  • Stage 1 - We make the case, for this you need to take a metal sheet and cut a square 50 * 50 cm from it.
  • 2 stage - to weld to the resulting square of Lemeh (it is necessary to do it on both sides, with the help of wedges);
  • 3 Stage - to docile the side brushes with a lemche, to fight them to the lemay and sheet;
  • 4 Stage - Take a dump to Lemeh and make sure all the joints, eliminate inaccuracies, if any;
  • 5 stage - after eliminating all inaccuracies and deviations, make welding work of all elements;
  • 6 Stage - we clean the welding seams;
  • 7 Stage - on the surface of the plow "go" emery paper.

4
Fasteners of the finished plow to the motoroblock

Attach the plow to the motoblock correctly - a very important task. In case you made a plow true, and attached it wrong, it will not work effectively to effectively.

  • carry out a balancing of a plow;
  • adjust the angle of inclination;
  • we check all nuts and attachments;
  • test the finished device.

5
Plow manufacturing - Excellent business idea

If you made a plow for yourself yourself, it regularly improves it, and it justifies your expectations by 100%, then why not do business making homemade plows? Such plows are in great demand among medium farms. The main thing is that you have the right drawings and the desire to turn your hobby into a profitable business.

During the manufacture of a plow, you do not need to rush. This device loves accuracy, be sure to follow the coincidence of the corners, do not comprehend the time for the manufacture of templates, because its productivity depends on the correctness of the device.

Add a comment

Your e-mail will not be published. Required fields are marked *

close