How to make origami frog

Crafts in the Origami technique attract both adults and children. One sheet of paper is enough to create a real masterpiece. Today we offer to make a frog. It is simple to make it enough, the main thing is to clearly follow the step-by-step instructions, described in detail in our article.

1
Jumping frog from paper in 5 minutes

Such a jumping frog will definitely attract the attention of children. Just a few minutes and an interesting toy will appear on your desktop. To create it, you will need a green leaf of the A4 format.

1 step - from a rectangular sheet Make a square, unnecessary part must be trimmed;
2 step - folded the figure to fold in half (make sure that all edges of the sheet clearly coincide with each other);
3 Step - a rectangle that you have turned out, you need to fold in half (now there is a smaller square again);
4 Step - the line for which you folded the rectangle should be clearly visible;
5 Step - the resulting figure to deploy (return to the rectangle) and the lower part turn to the line of a clear bend, return to its original position;
6 step - the left end of the bottom of the sheet bend to the right end of a clear bend (the triangle is obtained) and turn back;
7 step - a similar action to make with the right end of the sheet (bending is needed to the left side);
8 step - be sure to spend your fingers across all the folds of the folds, it will facilitate the further work of work;
9 step - carefully fold paper on the bends lines, the triangles need to be hidden in the inside, so that the sharp angle is (it will emit a paper frog nose);
10 Step - the end of the rectangle (which we used) adjust to the middle (the bend line was made early);
11 step - the right and left side of the rectangle will be turned to the middle (you should get a figure resembling a house with a triangular roof);
12 Step - a small square to wrap up to the base of the triangle;
13 step - from the right and left side of the figures obtained to make triangles, wrapped the ends to the middle;
14 Step - You have two corners, you need to pull in opposite sides and twist the paper (now the figure reminiscent of the boat);
15 Step - obtained 2 triangles lowered down (it will be a paws of a paper frog);
16 step - legs bend at a smaller angle (it is from this process that will depend on how the frog will jump well, therefore the bending line should be smooth);
17 step - the upper triangles also wrap (it will be the front legs);
18 step - to turn the frog in half and return to its original position, the line of the bend to dissolve;
The 19th step is, if desired, draw a paper frog eye and mouth.

Paper jumping frog ready!

2
Frog in "Movable Origami" style

The original handicraft "Cant frog" will definitely like your kids. It is suitable for a puppet theater or just for a fun game.

1 step - a green leaf of office paper folded in half, the fold line must be a clear;
2 step - unscrew the front side of the sheet to bend, then the rear side;
3 step - we turn back the front side and on the top we make two triangles (as we do the airplane);
4 step - a similar action to do with the bottom of the sheet;
5 step - the figure is folded in half (the pockets will turn out);
6 Step - Once again we fold the workpiece in half (make sure that all the corners of the figure clearly coincide with each other), we qualitatively make the fester line;
7 step - to turn the figure back, with the help of scissors (exactly on the bend line) to make an incision 1 cm;
8 Step - Exactly until the end is bending the lower sides of the shape on both sides;
9 step - to fold the figure in half, pocket in inside;
10 step - gently straighten the angles that mimic the nose of the frogs;
11 Step - Optionally, painting the resulting figure of eyes and language.