Reception of the summer soul is a wonderful way to refresh yourself and get a charge of cheerful on a hot summer day. Currently there are both stationary and mobile options. The article will discuss the construction of a stationary summer soul.
1
Summer shower should be placed in a sunny place if water heating is carried out from the sun. To ensure good water flow, summer shower should be installed on the hill. The size of the summer soul depends on individual preferences, but the optimal option is 1.5x1.5x2.2 m. So that the towels and clothing are not swept away, sometimes attach the locker room, separating it from the shower cabin with a plastic film.
2
The drain pit is placed 2-4 meters from the soul itself, and not under it to avoid unpleasant odors. The size of the drain pits depend on the intensity of the use of the soul, and should be at least twice the volume of the tank with water. The walls of the drain pit must be put on the brick to avoid the sedimentation of the side walls due to the blurring of the soil. This pit subsequently derived a pipe for draining wastewater.
3
For a stationary summer soul, the foundation is poured, pre-placing the pipe for the drain. If a tree, plywood, plastic, slate, or plastic film will be used as the wall material for the walls, then the framework of the future structure is fixed to the foundation, which should be strong enough to withstand the weight of the water in the tank, fixed on the roof of the structure. It can be made from a metal profile, pipes or wooden bars. The door is made from the same material as the walls, or replace the tissue or polyethylene curtain.
4
To ensure the collection and drainage of wastewater, a pallet (acrylic, cast-iron, metal, etc.) is installed on the foundation on the aluminum frame, which comes in a set with pallets, fed a pipe from the drain pit. Instead of the pallet, it is possible to pour the bottom with a solution in the form of a deepening with a chute connected to a drain pipe, and from above - cover with a strong wooden grid.
5
The tank is fixed on an additional roof support: metal profile or wooden beams. To water in the tank heats up more intense, it should be black. The optimal volume of the tank is 50 liters. Top of the tank introduced a pipe for water supply. The bottom is displayed with a fixed shower and a crane. So that the water fence was carried out not from the bottom of the tank, where the water is colder, and from the top, it is necessary to attach a flexible hose to the output tube in the inside of the tank, at the end of which the foam is attached.
If the summer shower is rarely used and not intensively, you can significantly save time and means, refusing a drain pit, a foundation and a special pallet, and for the walls - to use a tissue or polyethylene film, fixed on a wooden frame. In this case, wooden pallets are suitable, which provide good ventilation of the lower soul.
0
3376
