How to make pockets from paper?

What a wonderful man who came up with his pocket. It is a convenient device that without it hard to imagine its daily image. Coins, keys, phone and other little things very conveniently stored in your pocket. It will be wonderful if everyone's houses have comfortable and compact pockets, then all small items will lie in one place and on need, find them will not be difficult. Let's look at how paper pockets do it yourself and that it may be necessary for this.

1

Pocket envelope

All you need for the manufacture of such a pocket:

• White sheet is preferably thick paper (perfect square form)
• scissors
• hands to be not hooks

All to the banal simply. If we speak in the usual language, the principle is to add all the corners of the paper sheet to its center, and in order to be clearer, we will analyze this process.

• You are lying in a square sheet of thick paper (from density in this case, the life of its operation and the possibility, that is, what can be put in it or store it) are dependent. Find his center.
• We fold this sheet twice, then deploy.
• Now it will be necessary to press two angle opposite each other to the line, which remained from the collapse of the leaf itself. It is not necessary to add the angles in such a way that they do not touch each other's friend, accuracy here is not important. To make it easier, you can make a mustache (do not bother too much about this).
• Now, by the middle, we apply the remaining two opposite angle, and the bottom of them must then be bent on the other side. It should be noted that all 3 angle should be folded so that the middle of the paper sheet is closed.
• Cropped corners in the center can be any adhesive substance or scotch (at will and by the presence of a particular tool).
• One edge, as you understood, will not be attached, because this side of the envelope will be the entrance to our "pockets".

You can decorate such a pocket of anything and anyhow, everything is here at the request of the creator.

Now it will be possible to put everything that you just wishes. If you want to make more roomy pockets simply make it from a larger paper sheet. Such paper pockets can be stored in the drawer, and you can attach to the wall. It is best to re-establish your product under the interior of the room in which you want to locate homemade pockets.

In the event that you want an open pocket, just cut off the loose part of the envelope and get a very comfortable open pocket.

2

Original pockets

The main component of such a pocket according to the classic of the genre is a sheet of paper (it, as in the vulgar time, must be square). Next steps:

We form paper diagonally. Each step must be made clearly along the lines, because from such accuracy will depend on how smooth and neat your pocket will turn out.

The top corner of the sheet must be bent on the outer side. In this case, you need to bend in such a way that it touches the edge of the paper, but at the same time, did not go abroad of the material.

1. We take the corner of the paper from the edge and we do such a maneuver so that it is inside our future craft. In this case, this edge will be released as an angle that is located at the top (we were folded in the previous paragraph).
2. The same maneuver will have to do with another edge. At this stage, you will have a caretaker similar to your house.
3. Now we will work with a part that we have just bent, from it carefully turns away with a very small corner, after which we turn the craft and form a figure (rhombus) from the newly wrapped corner.
4. The angle that remains with us at the top gently bend in such a way that it will be down. Thus, we get a "cover" for our envelope pocket, which can be investigated in the previously made Rhombik.

In order for this process to become clearer, let's determine with the paper parameters (the size can be any at your request). Standard square size - all sides of 16 cm and if you do everything right, then you will end up with a pocket of 10 per 15 cm (width to height).

So that the liner came out the capacitor need to do the following maneuvers:

• From the lower edge of the square, which you have previously cut, retreat upwards only a centimeter and on the line we put several points with a pencil (but only such that they can be clearly visible). And draw a flat line on them (if there is a ruler at hand, you don't have to put points).
• The same process of the linen should be made from all sides.
• If you need a career pocket, you need to make a more allowance, this is the whole secret.

• In order for something easier to put something in the pockets, you can make a semicircular cutout at the top of our envelope. If you want the pocket to close, leave everything in its original form.
• It is clear that all the joints and the corners will need to be glued with glue or a tape bilateral so that the pocket is more durable and stronger.

Pocket, made with your own hands, is also perfect for the presentation of symbolically presents, folding different kinds of little things. In school corners it's just not to do without such pockets, so that this skill is still useful to you, and more than once.