How to make a playground

How to make a playground

Children love to play moving games. But just run, jump sometimes becomes boring. Therefore, children's playgrounds are built to entertain the babies in the courtyards of high-rise buildings. There you can find a lot of entertainment events. Who wishes, he rides from the slide, and someone is more interesting to make figures in the sandbox or swing on the swing. What if there is no playground? Of course, build with your own hands.

1
The first stage, decide on the place where the children's town is located. Call all the safety regulations. The territory should be clearly viewed so that you see the window of the house, which is doing your baby. It is impossible that the coating is asphalt or concrete, better - sand or grass. After all, the Malts are often falling, and on the soft earth the knees do not be afraid, like on concrete. If the site is intended for preschoolers, then do not place it near the reservoirs. It is forbidden to leave children alone near the water. The presence of a number of carriages is not recommended. With the existence of the road near the object, make a fence.

2
Remove and align the place for a children's town. Start with the simplest and necessary design - sandboxes. It is here that the kids spend most of their time. For this building you need to take four boards, 1.5 meters size. Processing to the planer so that there is no zoom. Build from them a square. From above, make a seat place from the same boards. It remains to proliferate and paint the sandbox in a bright color. The edges are inserted into the ground for 5-8 centimeters. Now inside the finished square, plump 0.6 m³ of sand. In the summer it is hot, children should not be in the sun for a long time. Therefore, the canopy in the sandbox does not hurt. It is collected from girlfriend. Poles are swapped at the corners of the sandbox or one support is installed in the middle.

3
To train the vestibular apparatus, children need a swing. To make a swing, you will need:

  • Electrolake, screwdriver, hammer.
  • Bar., cable or chain.
  • Edged board.
  • Crushed stone, cement, sand.
  • Bituminous impregnation.
  • Olife, paint, tassels.

4
We process two logs that will be used as pillars, bitumen mastic. I dig two pits with a depth of half. We lower our two supports there, exhibit at the level so that they stood exactly vertically-up, concrete. Let the concrete freeze. Then make the top of the swing. Make a surcharge from the board, attach the cable to it. It remains on the top bar to secure the cable and paint the swing.

5
Without gorki The playground will be unfinished. You can make it from wooden materials. It is useful for a bar, boards. The design is allowed any form. Well, if at the top will make a house with the entrance and exit. So that the baby rose on the stairs on the one hand, and on the other, he descended from the slide. The floor in the house is made from the girlfriend, for example, old doors. The roof is collected from slate, wood, also used awnings, etc. The staircase and the slide are made of iron. If welding works are not for you, then from the tree. Track slides make smooth to slid. To do this, use a linoleum or metal sheet.

After reading the instruction, you will now make the playground for children. In its area, everything is useful: old tires, stumps, logs. It is from them that can make it possible to make tables, shops, chairs for kids. Thus, streamline the territory on the estate.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close