Along with the mass of its advantages, the inkjet printing technique has two significant drawbacks with which it is necessary to be considered - the high cost of original consumables and problems associated with large interruptions to use. Restarting cartridges with compatible inks leads to a gradual clogging of the nozzles of the printhead, and a long "simple" - to their drying. You can restore the health of the printer head using its washing.
Constructive design of the corresponding block in different models of inkjet printing devices can differ significantly. We are looking for on the Internet and learn the appropriate instruction, then remove the head. Especially neatly appeal to the plumes. Excessive force when they are disconnected or strong inflection are able to bring a loop into an unsuitable state for further operation.- 10% isopropyl alcohol;
- 10% of the ammonia;
- 10% glycerin;
- 70% of distilled water.
But it will be easier and cheaper to use means for cleaning glass type "Mr. Muskul" or "Master Glitter" containing ammonia alcohol.
To work with flushing fluids, we will need a medium syringe and a small capacity, such as a deep saucer or cover. You will also need any bandage and PVC tubes of a suitable diameter, for example, from the blood transfusion system. In order not to stain your hands - we use medical gloves. A piece of bandage cut off, fold into several layers and put on the bottom of the tank. The second tampon, moistened in flushing fluid, without fanaticism, we wipe the lower part of the printhead, after which we put it with nozzles to the first bandage.With a certain accuracy, it is not very difficult to clean the head of the inkjet printing device, even in the case of a strong blockage. The most important thing in this matter is not to rush.