How to fix the cartridge

The printer stops typing sooner or later. And then the question arises what happened and what to do about it. But the answer is simple - ink ended in the cartridge. You should not immediately scare, buy a new "heart" of the printer is not at all necessary, it is enough to just fill it, it is very easy.

What we need when refilling the cartridge. For an inkjet printer, you need a good paint, which you can buy in any store engaged in computer equipment, syringe and tape. Immediately a few words about ink. Choose them carefully, because bad paint can quickly dry inside the cartridge, and it will have to save it. Remember one of the most important rules: cartridge manufacturers never produce ink for refueling. To refill a laser printer, prepare: powder, that is, a toner that can be bought in the same computer store, although often colored refills make up a deficit, and some kind of fitting for the workplace. You should mention a little about toner. In fact, it is quite toxic, while no masks, respirators and even army gas masks will save you from vapors, but if you rarely refuel it, then your health will not suffer.

Let us turn directly to the refueling and first will understand the inkjet printer. Type in syringe paint, after you take the cartridge and remove the sticker from it, which prevents you from seeing the hole through which the air leaves. Insert the needle in it and pour the entire syringe. Next, we strip the hole with scotch, since the paint can dry out due to air intake, and this will drive the cartridge breakdown. That's all.

In order to fix the cartridge from the laser printer, you will have to remove the side cover, after unscrewing several screws. Next, we will see the plug through which the toner needs to be filled, actually and do it. But if you are not lucky and you do not have traffic jams, you need to disassemble the cartridge completely, and then in the thin slot gently fall asleep the powder. So before choosing a cartridge, find out if there is a traffic jam or not, it can significantly help while refueling. Also ask if refueling is possible without unlocking the so-called chip. If not, then this cartridge you yourself cannot refuel and better attribute it to the service to specialists.

And finally, the advice that can help you with an inkjet printer. If you gathered a lot and often print, we recommend purchasing CSFC - a continuous ink supply system, thanks to which you do not have to climb to cartridges and constantly refuel them, as the ink will come directly from the paint bottle directly.