SAMSUNG independent refueling printers is simple, but requires special accuracy, care, and the corresponding equipment. We will teach you how to fix the cartridge of the laser printer of the popular model at home.
1
Classic paint change set: toner, screwdriver, vacuum cleaner, glue for plastic or hot plastic, as well as microfiber and latex gloves. In addition, it is recommended to purchase a microchip, which monitors the level of paint in the toner compartment and does not allow re-filling. What for? Because each cartridge has a built-in chip, and it will not allow the printer to work even with the filled compartment after disassembly, so it will have to get to the new one. Various programs for free access will help to get around the purchase that knock out the readings of the tracking sensor.
2
Let's start work. Remove the cartridge from the printer, following the operating instructions, and wipe it. Inspect the design, trying to avoid touches to the photocell and other significant parts. SAMSUNG ML-2160, ML-2165, SCX-3400 and 3405, the cartridge scx-3400 and 3405 are not fastened, like most printers, and stay on the buttons that are easily cleaving. Take a thin screwdriver and slowly open the sidewalls on both sides. The main thing is not to damage the mount, otherwise the print quality will deteriorate significantly. Disasselect the cartridge for 2 parts: bunker and toner storage.
3
In the same method, we open the side walls of the element from two sides, where the photo is located. Here are the wastes of toner that need to be removed.
4
Carefully remove the photocell and shaft, declining the locks on each side. We wipe the details of microfiber or paper napkin. Photo cylinder We advise you to put in the box to avoid flashing.
5
If the toner replacement is urgent, then the rocket (cleaning blade) can not be removed, but it is desirable to remove the remnants of the spent toner. Either try to hold out the bunker thoroughly. Raquel is removed by unscrewing screws on both sides and cleared. Then it is cleaner the cavity of the bunker with a vacuum cleaner, and the blade is placed back. It is not bad to apply a little toner on the hem of the rhael over the entire length for a soft start after refueling the cartridge. Collect the bunker zone in the reverse order.
6
Go to the disassembly of the toner compartment for cleaning the magnetic shaft and the feeding blade from the old paint. Some masters do not disassemble the department, but simply pour toner and collect the cartridge. The choice is yours. If the shaft is slightly covered with an old toner, and the metal shine is bright, then cleaning can be avoided. If the powder completely covers the shaft, as in the picture, then cleaning is required. At the end of the article you will find several videos, where it is described in detail about the stages of disassembly.
7
It's time to fall asleep paint. On the left side of the compartment, you will see a cork that closes the toner storage. Remove the lid and fall asleep paint powder to the top. Close the hole, spend this part and start assembling the cartridge.
8
If you change the chip, then remove the old one and put a new one. The work is over!
And finally, a few tips: Wipe all the details using Mr. Muscul for glasses or a special alcohol solution. On the mounting of the side covers, apply a few drops of liquid glue for a good connection. All bolts are very tightly twist: "blobble" details will lead to bad printing.
0
1390
