How to insert a cartridge in the printer

Regardless of whether you are going to change the cartridge or fill it, you will have to get a device from the printer and return to the place. This task is forces not only by professionals of service centers, but also to simple users. Consider how to insert the cartridge in the laser and inkjet printer.

First, consider the Cartridge Replacement Technology for the Laser Printing Device. For this, the printer must be on the network so that you can get free access to its "internships". For some models, it is necessary to hold and hold the "reset" and simply pull the printer cover. In other cases, it is enough just to open the top cover of the device. In order to simplify access, in many devices, lifting the cover leads to the "exit" of the cartridge to the center.

To pull the cartridge, you should jump off a special mechanism that keeps it in place. It may be necessary to press the stubborn lock inside to open it. Certain printers require the "Reset" button on the side of the cartridge carriage side.

After the system is unlocked, get the cartridge. To do this, you need to slightly pull it towards yourself and then up. Next, get a new cartridge from the packaging, but do not rush it from the cellophane wrapper. Sometimes during the transportation or storage of ink in toner, they are selected, as a result of which the print quality may noticeably deteriorate. To avoid this, you need to shake the device threatening well. This will distribute the paint inside.

Now you can get a plastic cartridge and unscrew the tag sticker with a color pointer that performs the function of the protective film. Be careful, do not touch the print head with your hands, which is located in the same place at the bottom of the cartridge, since the spots on the surface worsen printing.

Insert the cartridge to your printer. Please note that it turns out to be reliably fixed in his place. Be careful in order not to put the cartridge upside down or ass in advance. All actions should be carried out without effort, and the cartridge move on the guides is easy and smoothly. If you feel the difficulty of moving the cartridge, remove and try insert again. If your printing device has a thrust mechanism, it must snap the cartridge tightly around the cartridge. Only after that you can close the lid.

Now you can print a test page. As a rule, if you did everything correctly, the computer itself will determine the replacement of the cartridge. In this case, the PC will ask you the question of whether you do not want to print a test page in order to check the operation of the device. Click "OK". After that, the settings and printed color page will be printed.

Be extremely attentive if you are going to replace not one cartridge, but several or all at once. It is very important to return them to the place in the corresponding cells inside the carriage of the printing device. Make sure the form and color of the cartridges coincide with the printhead data.

There is practically no difference in extracting and installing cartridges for inkjet printer. The tanks for ink are distinguished. However, the principle of installation is the same. Removing the adhesive tape with one of the sides of the cartridge, install it with this sider into the printer carriage holder and fix it pressing to a light click. Also spend a test page.

Of course, changing the cartridge every time the ink ends in it is very expensive. It is much cheaper to replace in ink cartridge. On how to do it, you can read in this article " How to fix a color cartridge“.