The cartridge is a kind of paint container that is in printers. In case of everyday printing, the paint ends quickly, and a choice arises from the user: buy a new, ink cartridge filled with ink or refuel yourself. Alas, buying a "native" container will cost a little cheaper than the cost of the printer as a whole, so we choose an independent refueling.
1
How to fix inkjet printer cartridges?Inkjet printer is an inexpensive option for home use. Such equipment is well coped with the printing of photos and excellent with the text. The disadvantage of inkjet printers is the speed of printing - slow.
2
The most important stage is the selection of high-quality ink. In the user manual and on the printer packaging, the models of the built-in cartridges are specified. It is for them that you must buy paint. Unfortunately, there are no ink from the manufacturer of printers, so do not skimp on good paint, otherwise you will get a bad print, dried nozzles and a faulty printer.
3
Go to refueling. Remove the cartridges from the carriage by pulling the special, plastic tip or pressing the lock button. Examine the tank. On the back you will see a sticker that closes the filling holes, carefully remove, but do not throw away! Usually in cartridges there are ready holes for refueling, but if these are not found, then make neat punctures with a needle in the appropriate recesses.
4
Type 2-3 ml paints in the syringe, enter the needle by 2-3 centimeters inside the cartridge and slowly injected the liquid. On 1 ml ink takes 15-20 seconds. Filling the container with a strong jet, risk obtaining air bubbles, which is categorically contraindicated. On the excessive filling of the ink droplets on the bottom. Select some paint with a syringe, and nozzles flush with a paper napkin and wipe with alcohol. Return the sticker back.
5
The refill of the color cartridge requires care to not take the tanks of paints. A quick way to identify ink will be the direct introduction of the needle to the container and pumping out paint residues into the syringe. For each hole, use a new needle and syringe in order to avoid mixing the paints. Enter ink into each tank before filling and wipe the printing system with alcohol after filling.
6
How to fix a laser printer?Laser printers are characterized by high print speed, long-term and amazing quality. The cost of the device is an order of magnitude higher than inkjet printers, but completely pays for itself. Cartridges are filled with non-ink, and special toner powders, work with which requires special caution. So before refueling, put the medical gloves and a mask. Perform work in a well-ventilated room.
7
Remove the cartridge and inspect. It is easy to fill containers that are equipped with a cork. Just open it, reflect the residues of the powder in the bag and fill out new to the top. Cock the hole and put the cartridge in place.
8
It is more difficult to manage with models without a cork. If you caught just this miracle of technology, then it is pretty to suffer. The smallest evil will be a bunker puncture, where the toner is stored, to make which you can with the help of a soldering iron, drill or scalpel. Be very careful and choose a hole for a hole distant from all chip and chips. Then insert the funnel into the hole and fall asleep the powder. Or disassemble the cartridge until you find the gap for refueling. Unfortunately, in the second version, the illumination of the photocell and the dissemination of the printer is not excluded.
Remember, independent refueling of printers can lead to a critical print deterioration or complete disabilities.
0
1454
