How to lubricate the hinges doors

Dirt and rust forms on the surface of non-loaded loops. As a result, they begin to creak and gradually come to unsuitability. In this article, we will consider the most appropriate loop care products and the correct lubrication technology.

1
Machine oil

This tool is the most common. Silicone and lithium lubrication is well suitable. These compositions can be easily found in automotive stores. For processing the loops, it is convenient to dial into the syringe with lubricant and apply it to the necessary sections. So that it accurately hit the mechanism, open and close the doors several times. For better amenities, take such compounds in a package with a thin nose. Then the syringe does not have to use.

2
Special sprays

There are universal funds that can be lubricated any details and mechanisms. Most often they are produced in the form of sprays. The most popular of them is the WD-40 aerosol. It is sold in almost all stores of automotive spare parts. To eliminate the screens, spray problem areas. Application must be accurate and rapid. Try to act so as not to leave traces on other surfaces. It will relieve you from excess work.

3
Vegetable oil

If there are no suitable tools at hand, you can use conventional food, such as vegetable, olive, sunflower. But note that the effect will be short-term, since such oils do not clean the surface and quickly clogged. A few days later, the ill-fated creak will arise again. Experts do not recommend using this tool, as it reduces the service life of the fitness.

4
Griffing from pencil

If you have a pencil at home with a soft blade, use it. To remove the griffel, burn a pencil - the tree burns, and the strain will remain. Then gently lift the door and place the slices of the griffel in the gap. When the door goes down, the griffel will turn off. To complete the splitting of crystals, close and open the door two or three times. The loops will cease to publish a creak. It is worth noting that graphite protects the metal from corrosion well.

5
Paraffin

To eliminate the violin, you can use wax or paraffin with a conventional burning candle. Carefully order it in the rubbing elements of the door loops - creak will leave.

6
A little about the technology of proper lubrication

Some experts note that you first need to determine the cause of the screens (internal or outer part), and then lubricate problem areas. But it is much more efficient to make full lubrication. The loop consists of two parts and connecting their rod. To effectively eliminate rust and screenshot rod, it is recommended to pull out. Wipe off all the details available dirt and dust. Then apply lubricant to the rod and loops. Pretty lubricate all the details so that the dry place is left. Insert the rod back.

If the loops were very covered with rust, and the rod is not removed, use the following method. Fill all problem areas with rust converter. After 12 hours, try to remove the rod, pressing the screwdriver on it on the one hand. Some craftsmen are trying to knock out the hammer, but this approach can lead to damage to the mechanisms. When the rod is extracted, clean all the details and process them with lubrication. If the rod wounded, try to straighten it with a hammer, and then set back.

Timely care ensures uninterrupted operation of all mechanisms. Special oil removes all sorts and dust, well cleans the loops. Lussing loops and lock should be carried out at least once a year. Then the accessories will last long and will perfectly perform its functions.