How to adjust the door cabinet coupe

Sliding elements of cabinet furniture quietly withstand intense operation. They are not damaged from active movement, only gradually deprived of functionality. Restore "performance" of sash helps knowledge of adjustment technologies that use home and professional masters. The choice of a system of actions is determined by the nature of the problem.

The deterioration of the door fixation caused by its weak adjacent to the wall. The case in the stopper, providing a dense adjoining. This square in form, the small mechanism is exactly in the center of the groove of the lower rail. If he fell or moved, it's necessary to return it to the place, put on the superclauses, it is good to press someone, and then leave under the improvised press for half an hour to enhance the clutch. When breakdown or loss of parts of the mechanism - replacement is required.

Dischase of the sliding element with the formation of noticeable holes. The main reason for the curvature of the leading parts is the breaking of the extreme screw, located in the corner of the door, under the buffer ribbon. It should be left, the screw is to scroll or counterclockwise (to eliminate the upper gaps), or clockwise (allows you to remove the slots from the bottom). With the desired screw, adjacent to the fastening of the frame, you need not to be mistaken.

Partial loss of sash. In this, as a rule, the habit of owners casually throwing massive, long items or overwhelming the sections, breaking the walls into the wardrobe. A couple of months of such behavior, and the owners will not only understand how to adjust the door of the wardrobe, but also know where to buy spare parts for repair. With the accurate use of such trouble, the moving side from the lower guide leads to such trouble. Here you will need to remove the sash, carefully straighten it and push back.

Noise when driving. Outsided sounds talk about overhead roller skew. The method of its strengthening depends on the "nationality" of the profile. In the products of European producers, the question is solved like this: the door is removed, the roller is dragged until its overhangs above the back and front parts will be the same (approximately 1.5-2 mm), the sash again is inserted. In Chinese models, it is necessary to narrow the profile handle by 2-3 mm by powerful squeezing.

Adjusting the sliding elements is relatively simple. Its execution methods are subject to two rules. First: Tighten the screws with a screwdriver hexagoned. Second: before installing any detail be sure to wash, wipe the rollers and rails. After all, on them, when removing the elements, dust will surely rush, which prevents high-quality assembly.