Part of the foundation erected above the ground level requires protection and finishing. A qualitatively fulfilled reason will extend the life of the entire structure, and the beautiful appearance of such a base will allow the building to fit into the style of the buildings around it. It is possible to achieve the desired result in various ways.
1
Foundation coating Plaster - Decorative finish is put on a predetermined surface using reinforcing grids. The surface of the applied layer can have a sleek, grungy or mosaic look. By applying the extender, special stamps or rollers, perform various options for imitation texture. The concluding layer of the plastered surface will be painting with facade compositions. This type of decor is the most inexpensive.
2
Finishing PVC panels - plastic siding makes it possible to imitate any surface: wood, brick, granite and much more. Fastened to guides via a dashed panel connection. Construction points offer material of various dimensions, colors and structures. It is worth noting that siding will not be able to withstand strong mechanical damage.
3
The use of special basebars - this method appeared relatively recently. Mounted on a wooden or metal frame by self-drawing. The main advantages of these panels are subject to stress resistance, chemical reagents and good frost resistance. And also they retain an attractive view for decades.
4
Facing a stone - natural or artificial. Stone tiles are fixed on cement mortar or tile glue with a thickness of 3-6 mm. Plates from natural stone, especially some granites or quartzite, are one of the expensive finishes. But the prestigious appearance and service life of this is worth it. Artificial products are affordable by price, and externally almost no differ from natural.
5
Protection by clinker tiles - the foundation lined with these material visually similar to the brick wall. For mounting plates, plastic glue composition is used. The clinker tiles is practically not absorbed by moisture, so it is not treated on top, there is enough high-quality grouts of the seams.
6
The use of composite material - polymerpessage tiles. The material is characterized by a slight weight and good elasticity. Successfully applied in different regions, it does not crack and does not give chips. Fastened on screws directly on the basis or on the frame structure.
The owner himself makes a decisive choice, the inexpensive imitation is suitable, and the other is a natural structure. The most important thing is that the foundation is reliably protected from the effects of frost and water.
0
1965
