Polypropylene pipes are highlighted in a fairly easy installation. All parts of the parts can be performed independently, only the development of the polypropylene welding process will be required. Learn this is much simpler compared to metal pipes. Working with products requires fulfillment of certain conditions:
The room temperature should be higher than 0 ° C;
Products should be protected from mechanical damage;
It is prohibited to weld metal near polypropylene pipes.
1
Prepare the mounting tool:
Apparatus for fuse-welding polypropylene;
Nozzles corresponding to the diameter of pipes;
Truboresis or special scissors;
Fatheck.
2
We wear pre-purified Teflon nozzles on the welding unit. Set the temperature of 260 ° C and warm up the device to the operating temperature.
3
Sut off the piece of the pipe of the required size with the help of a pipe cut, remove the chamfer from its edge. If reinforcement is present, then additionally we clean the aluminum foil. Next, we make a marker, corresponding to the length of the entry of the end of the pipe in the fitting until it stops. Now degrease the treated surfaces.
4
Place the apparatus at first fitting, then the pipe. During thermal processing, parts should remain fixed, and the heating time is selected according to the table attached to the welding unit.
5
After the preparation of the preparation of the workpiece is removed and neat movements that exclude circular rotation are connected to each other. The target of the full landing is the previously performed mark. It remains to wait for the cooling of the docking connection.
Having managed to manage with the installation of polypropylene pipes, replace the old water supply will not be greater difficulties. It turns out that many homework can be made with your own hands. The assistant here is the right tips and videos on the topic.
0
6747
