How to make a brand

How to make a brand

Preparation of kebabs in nature is much facilitated by mangala. Among the advantages of the mangala are allocated as follows: the possibility of transportation, fire safety, ease of use. The material from which the brazier is made, its size and functionality is determined by the sole preferences of the person. This article proposes an option for making a mantal made of metal.

1
Tools and materials:

  • Sheet metal with a thickness of 2-3 mm;
  • Roulette;
  • Corolnic;
  • Bulgarian;
  • Drill;
  • Welding machine;
  • Protective mask;
  • Metal tube, corner or profile.

2
The height of the mangala box varies from 15 to 20 cm so that the meat is not burning, but at the same time it was baked, and not smoking. The width depends on the intended number of skewers, the distance between adjacent grooves for skewers is 8-10 cm, from extreme recesses to the side wall - 10 cm. The depth of the mangala is 25-30 cm. The angles of each part of the box must be 90 °. The height of the mangal depends on the growth of the cook and is 90-120 cm from the ground to the level of holes for skewers: the cook must be in a convenient relaxed posture when cooking kebabs.

3
For 10 skewers, the following sizes are offered for 10 skewers:

  • bottom - 1.1 by 0.3 m;
  • front and rear wall - 0.2 per 1.1 m;
  • side walls - 0.2 0.3 m;
  • legs - 0.9 m.

4
The best material for the manufacture of mangal is a sheet metal with a thickness of 3 mm. For legs, metal profile, corners or pipes are used.

5
Wire material marking and cut it with a grinder. To ensure sufficient oxygen flow to maintain the combustion of firewood and coal, at the bottom of the box at a height of 2-3 cm, the holes are drilled with a diameter of 1-1.5 cm at a distance of 4-5 cm from each other. Deections for skewers are made in the upper part of the front and rear walls of the manga with the help of a grinder, at the same distance in relation to the side walls.

6
With the help of the welding machine, connect all the blanks. The legs are welded to side corners: seam must be 2-4 cm for rigidity and stability. If you need to create a collapsible brazier for convenience of transportation, the legs should be attached to the bolts. In the absence of a welding machine, all parts can be connected with metal corners and bolts.

7
Often, stationary mangals are equipped with side lattices for the necessary dishes, a lower shelf for firewood, roof in case of rain. From the side of the mangala you can spend the hooks for the aquer and brush. From above set the grid to prepare in the bowler, for example, ear, or use a metal sheet with a round neckline as such a support.

Mangals for cooking can be not only an excellent functional addition to rest in nature, but also to decorate the garden plot, if used forged products.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close