Arbors in the country are made from any girlfriend, whether there are chic works of art from metal or wood, the arbors are simpler - from cellular polycarbonate, even from plastic bottles and then manage to make functional arbors. Excellent girlfriend for a gazebo - reed, he is not terrible neither dampness, no rain, no fungus. This gazebo will serve you faithfully, and it will cost cheaper than wooden or plastic.
1
To begin with, decide on the place for the arbor - it should be close enough to the house so that you do not have to run through the entire area, if you need something. On the other hand, so that noisy feasts or smoke from the Mangala fell into the house, the gazebo should not be adjusted close to it. Arbors from the root look good in the landscape, but try to choose a place so as not to spoil the type of massive structure. The place for the arbor must be smooth, perhaps a little raised so that water was not accumulated under it.
2
The most important stage of construction of any room is its foundation. The gazebo, of course, is not a house, but that she pleases you for many years, to the issue of the construction of the foundation you have to go with the mind. The most practical foundation is columnal. Align the place under the arborement, dig a holes under each of the corners of the future gazebo - on the width of the shovel and the depth of half the meter. Also dig a few holes around the perimeter so that the floor of the future building is not fed. These pans need to install pillars - they can be both ready and simply filled out of concrete.
3
When you installed pillars, make the floor strapping - from sleepers or wide bars. That is, completely without wood work you will not hurt. After the dressing of the floor is ready, make the creston of the base and nail the floor board. All Wooden Details Arbor must be processed, for example, copper vigor. This will protect the tree from rotting under the influence of moisture. Just be careful, work in special clothes and gloves, protect the respiratory organs, as copper vigorous and similar means - poisonous.
4
Decide that you will have a gazebo or closed, and from which walls will be made. The main supporting design is also made of wood - it is a frame of arbor, rafters and railing. The side of the arbor can be sewed to the boards, and you can reed to the manner of the village's piants. That is, to install vertical crossbars and, it makes a malleable reed, whittle all the boards of the arbor. Then, handle all the wooden parts of the oil, cover with paint or varnish, give dry, cover up and leave until winter.
5
The final stage is the roof assembly from the roof. You can attract friends, as the work has to be impressive. Collect the reed in the winter when he has already completely risen and is ready to use, and go to it in the frost is easiest. Cut the stalks with an acute shovel, you turn to the site and store there to spring in a dry ventilated place. In the spring, you start further work: link the reed in the bundles - with a diameter of up to 10 cm, level, crush irregularities. Put the bundles around the perimeters of the roof, starting below. Each bundle is attached galvanized wire to the root base.
Inside the gazebo, you can make shops and a table, or simply make plastic furniture. Cantry from the root, of course, is not so durable, both of metal or wood, but also will not require such large costs. In addition, they are made of environmentally friendly material, and to fix them or change the coverage in time, you only need to collect a new batch of the cickens.
Share advice:"How to make a gazebo from the canthage"
0
2342
