The dream of any dacket is a reliable and big brand, so that the kebabs are enough for the entire honest company of friends. It is not always possible to purchase exactly this, because of its high price. Therefore, it is worth making an audit in the barn on the subject of rented means suitable for the manufacture of self-made mangala.
1
In the barn, there may be an old metal barrel, which served his centuries from gas. This is exactly what you can build a brazier.
2
The cylinder must be put horizontally and on its top measure one third part, making the horizontal mark with chalk. On this line, the cylinder must be cut with the help of a grinder to which the circle of metal will come.
3
The cut part can be handed over to scrap, if you are satisfied with an open brand, and you can make a cover from it so that the grill is closed. Then it can be used as a smokehouse. The lid must be fixed using conventional metal door hinges, welding them to the bottom of the mantle and actually to the lid. From above to the lid, you need to weld the metal handle.
4
Now the time of the internal arrangement of the manga has come. On both side internal walls of the cylinder, it is necessary to welcome metal guides to which skewers with kebabs will be laid or a metal grid for meat frying. It can be welded alone from thin metal rods, observing the exact dimensions of the upper cut part of the cylinder. The grille will be rectangular and in length it will be exactly the same as the height of the cylinder, and in width - as the diameter on the site of the cylinder section.
5
In the lower part of the mantal, in the area of \u200b\u200bcombustion of future coals, the metal drill must be made of 20 holes, a diameter of 10-20 mm. They are needed to create thrust so that the firewood burned well. If there is a desire and the possibility, then on the end of the mangala, you can make an exhaust pipe. To do this, with the help of the welding machine, a hole is cut, a diameter of 10-15 cm, and then the pipe of the same diameter is turned into it.
6
For the stability of the mangal from the cylinder, it must be installed on metal supports made from the high-crossing reinforcement or any suitable metal suitable for these purposes. The balloon itself to such supports is better to weld with the welding machine. The last touch in the manufacture of mangala is to paint his refractory paint so that he looks not like an old unsightly balloon, but as a work of country art.
Your new brand from the old one who served his century cylinder is ready. We call friends and treat their delicious kebabs.
Share advice:"How to make a brazier from a balloon"
0
2435
