Laying a new carpet, stripping or painting the door, grinding the root of the sludge edge and the mass of the reasons occurs in everyday life that require the removal of the door with the loops. Such a procedure may be a difficult thing, especially if the door stood in place for years. The complexity may depend on age, the general condition, the design of the loops and the door itself. And although it looks quite simple, but during the work you can get a household injury, especially if you deal with a heavy, solid wooden door.
How to remove the door with loops - prepare tools
Before shooting the door with the loops, make sure that you have the necessary tools at hand. The most important of these are hammer and wedge (nail) to knock out the pin of the loop, as well as a screwdriver, which is useful for the extraction of the pins of the pins.
How to remove the door with loops - fix the door surface
In addition, that this work go smoothly, first fix the door in the open position. To support them, you can apply a conventional piece of cardboard, tree bar or any thick book. You are going to destabilize your door, so their support is important to prevent closing while you work with their fasteners. The book-trapped under the door gap fix the surface in the desired position.
If the weight of the door is massive, apply a wedge with a montage under the canvas to remove the load with the loops. If you have the opportunity to attract a friend to the process, it should not be abandoned.
How to remove the door with loops - knock the pin from the loop
Take the hammer and wedge into hand. Insert the flat end of the wedge towards the pin against the pin and does not rush to the hammer on it. Choose it gradually up until it completely comes out. It is better to do it slowly, since a hurry can lead to scratches and damage to the pin itself. You can apply spray-lubricant at this stage if difficulties occur in extracting it.
How to remove the door with loops - take out the pin
Show pin you can get with the help of an old screwdriver. If this does not work, continue to beat with a hammer. Shifted remove the pin. For stability remove first the lower hinge, and then the top. If you are working with tricuspid door, then immediately remove the infill panel. Sometimes it is recommended to use the bit, but there is a risk of damage to the door.
remove the door
Once all the pieces are removed, it is time to remove the door. Be very careful, because the doors can be very heavy, so it is strongly recommended to work together. If you are performing the procedure on their own, show special care to protect yourself from tipping doors.
Remember that the door hinges are not only on the type of material from which they are made, but also on the characteristics of their design, so the removal process is slightly different.
0
1335
