How to stroke the wall under wiring

How to stroke the wall under wiring

Shtroba is a long groove in the wall, on the ceiling or in the floor, in which cables and various wires are laid. You can stick any solid material from which one or another design is made: brick, concrete, foam concrete.

1
In order to make a stroke, you must first draw a pencil line on the wall, which will go wires. And then already, strictly following the markup, start beating the stroke.

New

2
The best and most reliable option will be the use of professional power tools - strokeware. It only needs to be accurately attached to the wall at the beginning of the line and then direct the drawn path. Stroke will cut through the rotating disk.

3
Stroborez - the thing is dear, if there is no one in the house, then you can do the usual puncher. A special chisel is inserted into it, which comes with a tool. Next, this electric chisel step by step is made by shit. If there are skills to work with the perforator, then the shock can turn out as neat as when cutting it with a strokesom.

4
Suppose there was no one of the tools presented above, then the shroud is possible to make a regular drill. According to the marked line on the wall, you need to chop a lot of holes, at a distance of 1 cm from each other, and then with the help of ordinary bit and the hammer manually smash the membrane between them.

Cut

5
And if there is not even a drill in the house, then the stroke will have to do completely manually: the powerful chisel is applied to the line on the wall and it beats on it with the same powerful hammer. Moved on the drawn line, by the end of the next day you can make the desired stroke.

Bit

6
As you know, all cables and wires in the wall go to all sorts of electrical appliances: sockets, switches, regulators, etc. In order to install one or another device, the wall need another hole under it. You can make it using the same bit or using a special round nozzle on a perforator that will cut the perfect circle in the wall or on the ceiling.

Whatever way you do not make a stroke in the wall, do not forget about safety technician: work only in protective glasses. So you will save yourself from getting sharp concrete or brick fractions in the eyes. Good luck in repair!

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close