Sometimes there are situations when due to redevelopment in the house, rearrangement of furniture or for some other reasons you need to make a power outlet. What to do in such a situation? Search for electrics or try everything to do it yourself? We will tell how to quickly and qualitatively transfer the outlet with their own hands.
1
To work, you will need: Passatages, screwdrivers, knife, voltage pointer, tape, alabaster, spatula, and of course wire itself.
2
Getting Started, de-energize and check the voltage pointer to its absence. Then find the junction box and open it. Find the wire in it, which goes to the outlet, and disconnect it.
3
Choose a place where you will stand a new outlet, and on the place to make a hole for a subside box. If you have a brick or concrete wall, then the hole can be done with a crown with diamond inserts or cut into a chisel. If the wall is wooden - use a crown for work with a tree or cut off the deepening of the chisel. It should be a little more box itself.
4
Divide the alabaster and spatula to spread it inside the fifth. After that, insert a sub-box into the hole and smear it with alabaster. Spatula Zadach all irregularities. The edges of the box should not oppose the wall. The box should stand the hole for the wire up.
5
While the alabaster dries, we join the stroke (groove) for the wire from the junction box to the outlet. Pick the wire from the same material from which you have the entire network. Do not connect copper with aluminum! Load the wire in the stroke. It is possible to fix it with special brackets or smeared by alabaster.
6
Connect your rosette to the wire and secure in an observed box. After that, connect the wire in the distribution box to the old place. The twist of the wires should be reliable, otherwise it will be heated. Twist with a qualitatively exhibit with a tape. Upon completion, squeeze the groove and turn on the power supply.
7
You can make a power transfer a little simpler, however, it is not entirely according to the rules, but if you do competently, everything will turn out. Remove the old outlet and in the same place install Rosopredarob. Next, do the stroke before the place where your socket will be and do everything, as we wrote before. In Rosopredarob, make a reliable twist of the wires and insulate them with a tape.
In general, there are no special wisdom in the transfer of the outlet. Try, and everything will work out - and take the outlet, and save money.
0
1748
