Today, beekeeping is a very popular occupation. Even novice beekeepers know that the honey productivity of bees largely depends on the design of the hive. There are a lot of options for arranging bee houses, but most of the beekeepers still give preference to the Ulyam Dadan. Following clear instructions, to build Dadanovsky hive with their own hands will be able to even an inexistant newcomer in this area.
1
The total dimensions of the future beehive are the following: front and rear shields - 530 mm x 320 mm x 40 mm, side panels - 480 mm x 320 mm x 40 mm, and the internal dimensions of the hive - 450 mm x 450 mm x 320 mm. Detailed dimensions are presented on a schematic drawing.
2
The first thing is necessary for the manufacture of Dadanovsky hive is to choose the appropriate material. For such bee housing, a high-quality light tree is chosen - it can be Lipa or Iva. In the absence of such a material, the use of coniferous breeds - pines or ate. In addition to the main material, a wood processing machine, carpentry tools, paint and casein glue will be required.
3
The manufacture of the hive starts with wood processing - for this it is dismissed on the boards, which are later used for the body and the bottom of the future bee house. The optimal thickness of such boards is 40 mm. Then the grooves are cut into the cut-off chalkboard, with which the walls of the hive are joined. Connect the boards using a cutter.
4
Then the thin strips are cut out, 18 x 4 mm. Next, the boards are connected to one shield - for this, the plank and the prepared grooves are treated with wood glue and tightly connect with each other. At the exit, five shields are obtained, which will be the walls and the bottom of the future hive. With the help of glue and nails, the shields are collected into a single case, after it is opened with paint and drill pilots.
5
For the manufacture of the last part - the roofs of Dadanovsky hive - the board will be required, the thickness of which is 15 mm. The roof is treated with water-repellent impregnation, coloring and drill several holes in it for 10-12 mm for bee housing ventilation. When the metal grid is tensioning under the holes, the hive is ready to settle the bees.
By the way, beekeepers argue that the breeding of the bees brings not only a natural useful product, but also great pleasure and calmness.
0
3885
