Using this instruction, it will be easy to make a traditional birdhouse from racking sawn timber. The construction of the dwelling for the starlings will be an occupation, interesting both men and boys and the female half of the family.
1
For the manufacture of a bird house, a cutting board of coniferous rocks is a thickness of 18-30 mm and width of 150-200 mm. The fastening of parts is performed by self-pressing or nails with a length of 50-60 mm. The paper uses tools:
Wooden hacksaw;
Roulette and square;
Drill, drills;
Screwdriver or screwdriver;
Paper essay;
File;
Plane;
Hammer.
2
Suitable in size cuts are sharp, with the exception of the front of the nesting room - its surface is left with a rough so that the chicks can get to the exit from the house. Details of the future products are drawn on the boards, it turns out seven blanks with specified dimensions:
Front and rear walls;
Two parts for the lid;
Bottom;
Two sidewalls.
The cruel cover is optional to do the duplex, the use of flat design simplifies the manufacturing process.
3
The boards are collected according to the markup, pretend to each other - we are convinced of the manufacturer. Getting started to drill the flyer, which can be done with the help of a feather drill on a tree, "balleritsa" or a regular drill, having done a lot of holes along the drawn circle. The resulting hole is processed with a file, all the ends of the blanks are enjoyed by the sandpaper. The diameter of the flyer for the flashes is about 45 mm, for the sinice - 30 mm. Too big hole will provoke the penetration of birds of prey, which is not at all necessary.
4
First, the walls are connected: nails are clogged with an indent from the edges to prevent wood splits, and thin holes are done using screws. For reliable fixing, 3-4 nails on each side joint, the bottom is fixed at two points on each side. The upper part is performed by removable on self-drawing - the house is recommended sometimes cleaned from unnecessary garbage.
5
A pranch is attached to the front wall, made of a servo glass up to 100 mm, a tree corner with a hypothenoise 70-90 mm or a bitch from an old tree is used. Large slots at the bottom of the nesting are close to packles, upstairs are specifically left for ventilation. It is not worth painting or soaking with an antiseptic product - birds do not like smells of chemicals. With a strong desire, it is allowed to decorate the birdhouse with non-toxic paints, such a water-based compound. You should not cover the hook cover, it will be late in the sun and in the house will be too hot.
6
The finished birdhouse is hanging on a tree by wire - this way will protect birds from cats. If there are no high trees on the territory, then the rack made of metal pipe with a height of 3-4 m is mounted, to the upper end of which a birdhouse is fixed through the rail. When installing the air hole is sent to the east or south-east. The birdhouse should be in place already in early March, so you can hang it in the fall. It may happen that the first sparrows will be settled, nothing terrible - the starlings are able to drive them out, just like the house they liked.
In addition to classic structures, the birdhouses are executed from other heater materials: logs with remote core, rope-related branches, and even encounter options based on a wicker basket. Bird houses are different - it can be cinema, countersiders, as well as dupes for food and woodwood.
0
3022
