How to make a collar?

Recently, collars made with their own hands are very popular. You have the opportunity to create an original and stylish collar for your pet. At the same time, to choose the desired color, the material, as well as to decorate it original.

1

How to make a braided collar?

For the manufacture of a wicker collar, we will need:

• cord;
• buckle;
• half-trip;
• scissors;
• matches or lighter;
• ruler.

Before the start of the collar is started, make a pet neck circumference with a centimeter, then measure the needy length of the cord. The collar woven from the cords can boast with its strength and stylish views. It will suit both a small and adult pet.

Production:

• Cut the cords on the necessary measurements.
• Cut the ends of two cords, connect and press them with your fingers while they are hot.
• We fold the food cord twice so that the fold is on the place where two cords are connected.
• Take them through the buckle so that the loop formed.
• We stretch two cord through the second half of the buckle.
• Watch the tips of the shoelaces around the buckle so that the collar does not raise. Walk on the laces semiring.
• Tie a node as shown in the photo. We repeat until the required collar length is reached.
• At the end, wrap the ends of the shoelaces inside the hole in order to fix them.

• Having reached to the end, we produce the same nodes in the opposite direction. Thanks to this, the collar is two-layer and very durable.
• Watch the ends of the shoelaces inside, as shown in the photo, then migrating the ends of the shoelaces with a lighter.

Collar for your favorite is ready!

2

How to make a collar from a nylon tape?

For the manufacture of a collar from a nylon tape, we will need:

• nylon tape 2.5 cm;
• color ribbon 2.5 cm;
• fastex clasp;
• two sloping buckles;
• half-trip;
• threads;

If the collar is intended to a small puppy or kitten, then a nylon tape is using a 1.25 cm wide. In order to be determined with a long tape, it is necessary to measure the neck of the puppy neck and multiply the resulting digit by 1.75.

Production:

• Color tape apply to nylon and flash on the sewing machine and manually, first on one side, then on the other and edge of the tape.
• Establive the fastener and do it through it a nylon tape. The extended edge should be 5 cm longer.
• We begin the long edge of the nylon tape and we flash it.
• We produce a free end of the nylon tape across the semiring, we move it to the fasteners and flash again.
• The free end of the tape is made through two slotted buckles, after the second part.
• Take a nylon tape through the buckle, thereby we will make the second loop.
• We reject the end of the nylon tape and flash across. So we fix the buckle.

A collar of nylon tape is ready!

3

How to make a skin collar?

To create a leather collar, we will need:

• leather tape;
• rivets;
• leather glue;
• knife for mowing corners;
• buckle;
• half-trip;
• awl.

Production:

• Cut the leather strip 2-2.5 cm wide length. In order to decide on a long collar, it is necessary to measure the seabe circumference of the pet and add 25 cm.
• At the edges of the leather tape, cut the corner in decorative purposes.
• I process the corners of the ribbon to mowing the corners. This procedure should be repeated on both sides of the leather tape. This is necessary for ease of use by the pet, your favorite will not run the neck with a new collar.
• We process the edges of the leather ribbon, leather glue.
• Wechil outlining places where rivets will be.
• Remove the top layer of the skin with a knife for mowing the skin. It will give the finished collar ease and softness.
• To create holes in the leather collar, we use a selection of different diameters.
• A sharp knife or scalpel produce an incision for buckles, as shown in the photo.
• We produce tape through the buckle, bend it, fix rivets or flashing.
• We wear half rings and fix the edge of the tape.
• We decorate the collar of various rivets.

Leather collar for your pet ready!

Make a collar for animals with your own hands, as it turned out, will not be difficult if you know the principle of assembling all the necessary parts to create a collar. Pick the desired fitness, which will be the base of the new collar, and create new accessories to your pet.