How to make a boring?

For lovers to make all their own hands, this article will be useful and quite informative. Today we will deal with how to make a boring yourself.

1

Samodelkin

Many do not understand what people are mastered with their own hands what you can easily buy in the store. In fact, do it yourself anything like this, I wonder and do not forget about the benefit. Today, the price policy for building materials and various kinds are quite high enough, so sometimes you should buy the necessary tool is not as easy as I would like.

In order to drill a well under the water to you in any case, you will need a convenient device for this, you can say. The main tools in this process is a boring, which consists of several main details:

• The pipe of the plug-in type (in this case it is the value of the detachable or not, because as it deepends into the ground it will be necessary to increase its size).
• The burden himself, which is the basis of the design under consideration.

2

Types of drills and their designs

It should be noted that there are several types of drills, let's consider each of them in more detail.

Let's start considering the spiral bora. In this case, the drill must be not small, it is definitely. Cuts into the ground such a car cutting face, which is sharpened very acute, and its edge has the form of the correct cone. But this is only part of the cutting part, more precisely, the lower part of it, the upper spiral is spinning and is located along the length of the stick (rod).

It turns out that in your hands you have a long rod, at the end of which the cutting blade is in the spiral, increasing in diameter with a small size to a large one. The maximum diameter of the tool under consideration in this case will determine the diameter of the well itself, which he can do, therefore, before proceeding with the manufacture of the bora, think what kind of well diameter you need.

It is clear that this kind of boring is very simple in its design and is used for the most part it is for manual drilling wells. Create such a boring will not be difficult, it is important to just have a desire and material for manufacture.

You just rotate the boring in a circle, while, the cutting elements are approaching the land, which gradually rises upwards. In order to make such a spiral boring, you will need a cylindrical type rod and a strip of steel so that later you could spend the second (more precisely, to the bottom part). It should be noted that it will be convenient to work with such a tool even on too dense and heavy soil, so it is worth it to keep in mind when choosing a boraxy that you are going to make.

The following version of the bora is the so-called bur-spoon. Opening of an earth type such a tool can be made even on a shrouded earth. This is a similar rotational instrument, which includes the following elements:

• metal rod
• cylinder on the end of the rod

There are several slots on the surface of the cylinder, one of them is spiral-like, the other is longitudinal. On the metal axis, the "spoon" itself is located not in the center, its location in this case is overhauled in one of the parties, and on a good 14 mm.

3

We do with your own hands

If we talk about the model of the bora, where you need to weld the spiral on the bar, it is not so easy to do this maneuver, but it's easy to create a simplified model, but at the same time, no less effective is another matter. The main thing here is the desire and ability to use various kinds of tools, by type, welding machine. Required tools:

• roulette
• bulgarian
• rod of steel
• steel Disc
• welding machine

Manufacturing instructions for steps:

• The drive from steel should be divided into two parts that will have the shape of the semicircle, it is easiest to do this by cutting it.
• I drag the resulting details. It is from the quality of the implementation of the process under consideration in the final result will depend on how effective will be, and how easy they will work.
• We take the steel strip, heating it and gently gives the Ruma Spiral, twisting it gradually into this form.
• After the proceeded process, we boost this form and weld to our bar.
• Here is an uncomplicated and fairly simple option to create the tool we need.

If you decide to make a bobbing yourself yourself, then for the beginning we take steel sheet steel and carefully twist it in diameter, the value of which should be selected in advance. The form must be cylindrical. Tools that will be needed in the process:

• cylinder from Steel
• welding machine
• the rod of steel is preferably
• drill that can cope with metal details

If you already have a finished pipe, then this, of course, will facilitate the process in question. Now, when one of our main details in our hands, you will need to "organize" the feeds at the end of the pipe, after which it is gently bent and sharpened, as it should be.

It would seem that the car is such a complex and useful thing, but, as it turned out, it is not so difficult to make it, so if you decide to make it with your own hands, be sure that this process will not take you a lot of money and strength.

By the way, some manage to make the drill do it yourself from chainsaws.