The spoiler mounted on the car will not only improve the appearance, but will significantly increase the aerodynamic characteristics. As a result, fuel consumption drops. The presence of a spoiler is also favorably affected by car manageability and increase the maximum speed threshold. You can securely secure the spoiler in two ways - on bolts or glass sealant.
1
It is possible to qualitatively establish a spoiler with the use of bolts if it originally provided holes for them. The spoiler is carefully adjusted and aligned on the site of the planned installation. From the side of the salon or trunk, you must drill holes, exactly matching with holes on the spoiler. Connect the design with bolts.
2
The method alternative to bolted fixation is glass sealant gluing. Before securing the spoiler, it is necessary to clearly define its location on the car body and outline the contours of the fit.
3
The surface of the outlined area is cleaned of dust, dirt and foreign particles. Degrease a special tool. To withstand to complete drying.
4
Apply a uniform layer of sealant for glass. The same operation repeat on the surface of the spoiler. The layer of the adhesive must be thin enough. The required layer size is usually indicated in the instructions for sealant.
5
Align the bonded surfaces. Carefully check the coincidence of the spoiler borders with an outlined area on the car body. The installed spoiler is temporarily glued on top of the scotch. This will reduce the load on the gluing site. The most convenient to apply the greasy scotch, which is subsequently easily removed and will not leave the traces of glue. After complete pouring the sealant carefully remove the auxiliary tape. Spoiler installed.
Careful preliminary calculation of the mass and form of the spoiler, as well as its location on the body, will significantly improve the operational characteristics of the car.
0
2928
