The balcony can be used not only as a storage room for unnecessary things. Due to it, it turns out to expand the living space, to equip a winter garden or personal account. For these purposes it must be inspired.
1
The balcony is preparing to glazing, for this we use foam block laying. This is done not only for insulation, but also in order to "drown a frame" in the balcony for a stronger attachment when installed.
2
We carry glazing. When determining the windows configuration, we are guided by the rule "the fewer openings, the better" will thus increase the illumination of the room and minimizes the weakening of the overall stiffness of the structure.
3
We draw the draft floor. This will require a timing segment 50 * 70 mm. The optimal height of the lifting of the floor is considered to be 7-15 cm. We are placed in transverse lags. Brussia must be fixed to the floor with anchors of 112 mm long and a thickness of 10 mm, the distance between which should be 60-70 cm so that there is no screenshot. Then we put longitudinal lags. With the help of the building level, we find the highest point, under it on the guide, far away, extreme lags, and after and the average align with the assembly wedges. I fix the longitudinal lags to transversely with the help of screws with a length of 71 mm, while it is not more than 20 mm in the bar.
4
For the insulation of the draft floor, we use mineral wool, laying it into several layers. What wools are more, the better, but it is not necessary to the ramp. After that, we take on the walls of the label in the center of each bar. On bars, we put the chipboard and attract them with the help of rotary screws, the distance between which should be up to 40 cm.
5
For the insulation of the walls of the balcony (except adjacent to the apartment) and the ceiling is used isolon. After being insulated with isolan, we attach the guides from the rail 20 * 40 mm to the ceiling with a screw of 71 mm long, align them like a floor. All joints of the insulation are necessarily sampled.
6
In advance, think over the future balcony design. Under the shelves, chandeliers, suspended TV, you must attach wooden mortgages under the panel to which we endure the labels for attaching accessories. On the guides set the panels. First we put the ceiling. To close the panel tightly, either a construction bracket, or galvanized self-tapping screw with a press washer. Lighting cables also depake under the panels.
7
After installing the side panels along the glazing of the balcony, the windowsill mounted. Install the mosper's frame between the floor and the windowsill. The entire parapet is wearing panels.
8
We put the finishing floor covering (laminate or linoleum). On the passage of the balcony, install the plinth. The seamless adjoining of the plinth to the panel can be achieved without difficulty, if you use a plinth with a silicone edge.
Of course, without experience on the insulation of the balcony, there will be a lot of time and money for the material, it is much faster to hire the brigade of professionals. But, first, there is no guarantee that even for big money they will fulfill all the work on conscience, secondly, they will never interfere with the acquired skills in life.
0
1011
