How to connect a wireless mouse to a laptop

Wireless mouse allows you to control a computer or laptop at a distance. Lying on the sofa, you can easily turn on or adjust the picture setting of your favorite film, quickly muffle the sound of high-profile special effects, put on a pause or see mail without burdened yourself with extra movements. The device is running on the principle of USB. Buying a wireless mouse, use the instructions for connecting or below the manual.

After you carefully examined the new acquisition, find the battery compartment (usually it is mini-finger AAA batteryware). The cover of the hole is located on the back of the mouse. The USB plug feeds directly from the computer and does not need an additional energy source.

Connect the USB connector to the computer or laptop. Most often, the wireless mouse receives a signal from the port of the computer, but the variety of models implies and the ability to connect directly to the port of the mouse, if the specific device is specific. If you currently have all the relevant outputs are busy and there is no need to free one of them without loss of productivity, then you need to purchase an adapter. Thanks to the adapter, you can connect the necessary device into the connector. Modern laptops allow you to connect the device in any of the USB outputs.

Start directly to activate the device. When the connector took the required port, turn on the tiny button on the back of the mouse to the ON position. Be sure to light the indicator (usually a red light bulb) from the back of the mouse. Remember, connect the accessory within 10 m from the source of the signal, but better closer, next to the computer. Check the signal reception radius after when the mouse is active. When the signal is defined, the computer or laptop must detect the device.

Swipe on the matte surface (gloss or the mirror may not perceive and display the signal, then the mouse simply will not move around the monitor screen) and see whether the cursor moves and whether the buttons are pressing when the folder or file is opened.

If the mouse does not respond to movements, try to rearrange the connector to another port and re-turn off and turn on the mouse after 10 second count. The lack of visibility of the moving mouse on the screen means that you need to restart the computer. Before rebooting, do not disconnect the mouse from the source and do not carry the connector, but simply restart the computer, and it will automatically detect the device.

Usually, simple wireless mice do not require drivers, however, if nothing happens, it means that the mouse is broken or you need to install the driver. But in those models where the ability to install the driver is provided, the disk is included. In case of problems, contact the store or service center (if the mouse is expensive and exceeds the cost of the budget option).