How to install windows 10 through bios

How to install windows 10 through bios

BIOS is a whole set of small programs needed to work with the main equipment of a personal computer. It is worth paying attention to the fact that you can install and restore the operating system of Windows 10 in various ways, some of them are quite simple, and when using others, there will be a lot of attention and perfection.

The creators of Windows 10, as reported by the media, did everything possible to work their operating system as simple as possible and understandable for all users. Approximately the same story is also the installation of the system. The entire process of updating or restoring the 10th version of the OS is extremely simple, and requires a minimum effort from the user. Often, situations occur when the installation of the system, or its recovery, must be carried out via BIOS, and for this you need to spend several responsible manipulations.



1
Record image
Windows onUSB-storage device

To install the OS installation via the BIOS, you must have an image recorded on the usual USB flash drive. Of course, a pre-storage device must be formatted, and it is sure that the flash drive does not let down at the right moment.

  • To write an image, it is advisable to use the Ultraiso program, with which we choose the desired image and click "Open".
  • In the "Self-loading" menu, select the item called "Write an image from the hard disk".
  • Next, variants of media will be defined to which the image can be recorded. We are at a flash drive, the volume of which should correspond to the volume of the image. Now it remains only to click "Next".

It is worth paying attention to the fact that data from the media is deleted in any case, so it should be taken in advance about the safety of important files.

Screenshot_35 - Copy



2
Settings
Bios.

Setting some BIOS parameters is needed so that the flash drive is the bootloader of the operating system installer.

  • First you need to restart the computer, and while switching on the Delete key, with which the BIOS is activated.
  • After the transition, you need to find the BOOT section in which the parameters you need are necessary. We need a Boot Priority point where you can find those download options that are currently available. In this case, we choose our USB drive.
  • To save the changes, you need to press the F key. Next window will appear to confirm the changes. Immediately after this will reboot a personal computer.

P35DiaMond_2 - Copy

3
System installation process

Now, when we installed an automatic start of data from an external drive through the BIOS, we have the ability to connect a USB flash drive, and the OS installation will start after the reboot.

  • First, select the desired system languages, confirm the policy of the developers, after which they select the recovery or installation of the OS.
  • Next, the main system disk is selected, which when installing the OS will be pre-formatted.
  • After the main installation phase, you need to pre-configure the system that includes the selection of update options, creating accounts, installation of basic software programs.

It is worth focusing on the fact that if possible, it still makes sense to hold no reinstalling system, namely the recovery, since as a result we do not lose important data on the hard disk, and the system should work correctly. When classical installation OS, there is a need to re-install programs and other components with which the PC user is usually operated. System recovery can be activated directly through the OS itself.

02-Windows-10-Install-Language - Copy

Add a comment

Your e-mail will not be published. Required fields are marked *

close