How to make an elephant of paper?

It is easy to make an elephant with your own hands and simply, and in the kingdom origami there are a lot of various elephants that will be interested to make children together with their parents. The article presents several interesting options.

1

How to make an elephant from paper using origami-equipment?

For the manufacture you will need colored paper of any color A4. It is desirable that the paper be on the one hand is white, and on the other hand, any color will be combined with the figure made by the figure: blue, gray, lilac.

In this option, the most important thing in the place is right to get the paper.

Step-by-step instruction:

• Use the sheet to be folded diagonally.
• Next you need to deploy the upper left corner.
• The bend, which turned out at the second stage, bending the end in addition.
• Now we work with the material that we have turned out in the form of several valves: bending and extending each.
• Repeat with a turn of the side several times until two sidewalls are formed.
• The bending obtained at the previous stages must be pulled out.
• We promote paper along the back and make a trunk.
• Bend the paper where the tail should be located at an elephant: bend the paper inside the model.

• I pull the closest to the left edge of the paper layer, flatten it to get the ear. The same is done and rear.
• Use fold to form an elephant body.
• Inside the trunk of an elephant, it is necessary to make a small bend.
• We form a body from an elephant. I spin all the bends and give the volume model.
• Everything! The model of an elephant origami is ready!

2

Bulk elephant

Such an elephant will become an excellent craft for children. It is very easy and just done.

It will take:

• Colored paper, suitable any color: yellow, pink, blue;
• Scissors;
• PVA glue or other stationery glue.

The main task in the manufacture of an elephant is smoothly and properly glued the details.

Step-by-step instruction:

1. We take a sheet of paper (half of the A4 sheet) and glue it in half, like a cylinder.
2. In this way, we produce four cylinders of the same size (it will be the legs of the elephant).
3. Cable cylinders glue with each other.
4. To make a torso at the elephant, for this we glue the same sized cylinder size - half of the Format A4 sheet.
5. We make another cylinder in the same way. It will be a head of an elephant. Printe over your body.
6. Cut the two identical strips of 2.5 cm.
7. From one carved strip, we glue a trunk. We will turn it into the tube, and after you turn back.
8. From the second cut strips we glue the tail.
9. A4 sheet bend in half and cut out two identical circles. These circles will serve as an elephant ears.
10. We glue the ears on the heads of the head.
11. Draw or glue your eye from an elephant.
12. We choose the appropriate color of the paper and cut out the elements for legs at the elephant: a small strip of 1.5-2 cm in size is folded fourly and cut the semicircle. Such elements should be six. Three for each leg.
13. Billets on the feet of the elephant are glued to the lowest cylinders. The main thing is to ensure that the blanks are the same in size, on the left and right leg.
14. The original elephant is ready!

An elephant of paper can make each other, without having much experience in this matter. And with such simple methods, such crafts will become an interesting toy for children.