The swollen bags with a cereal, holes in the walls and floors, spoiled harvest, various infections - all this leaves us mouse and rats. Particularly often encountered with them owners of cottages and cottages. How to declare war rodents and prove to them that you are not visiting them, and they? The right solution will be the installation throughout the perimeter of the housekeeping house. Consider the manufacture of the most simple designs that will get rid of you from the presence of unpleasant "neighbors".
How to make a mousetrap of plastic bottle
An ordinary plastic bottle comes to us for helping to capture a dirty animal. In addition to her, we will prepare auxiliary items - a thick board, a small bar, a wire, bait, a locking ring.
- Steel wire is kpripim to the board in the center.
- In a bottle, we embarked in any cereal, after which they balance it and plan on the wire, firmly fix the ring.
- We put the created mousetrap in the favorite place of the predator, put the neck on the bar and wait.
Usually 2-3 hours after installation, the mouse comes across a simple device. 
How to make a mousetrap of bucket
All mouse family can be collected in a bunch using a homemade bucket. To create, we will need a bucket, a plastic bottle with a lid with a volume of 0.5-0.7, a wire, a pair of skulls, tape, baking - fat, cookies, bagel or cheese.
- Thug the wire through the plastic container, we ride the lid on top and close.
- Fix the bait with the help of scotch exactly in the middle of the bottle.
- Pour in a bucket of 1 - 1.5 liters of water.
- We place the design on the surface of the bucket and fix.
- Ramp for lifting will serve 2 planks mounted at an angle.
How it works - mice, having a smell of beloved delicacy, climb the ramp, fall on the bottle, make any movement, after which the plastic wheel is immediately tipped into the water. For rating rats, this method is not suitable, as they can jump even from 1.5 meter barrels.
How to make a mousetrap from tin can
The usual cans from undercoofing, condensed milk, corn or coffee is capable of becoming an original assistant when fishing on mice. For the manufacture you will need a bait, a tin can, 1 ruble coin, a sharp knife.
- Open the jar, leaving the cover half closed.
- Attach the coin to any side of the tank, circle the felt-tip pen.
- Circle Delim on the teeth, cut through and bend inside.
- The bank is nailing a nail to the surface or secure scotch tape, we put a bait, close the lid and wait for the mouse.
The principle of operation - the animal breaks into the trap for prey through a neat mink, but it cannot get out back because of the sharp teeth. The only minus of this catch - the rodent can think after a while to beat sharp edges and crawl out.
How to make a mousetrap of five-liter bottle
We will need a square five-liter bottle, 2 pillars of medium thickness, a piece of wire, 2 bank gum, thick thread, use a bagel as a bait. So that rodents come for prey 100%, lubricate the inner edges of the bottle not refined sunflower oil.
- Cut the neck so that it can freely close and open.
- Next, we make a castle, for this we do in a bottle and a neck two through holes. Insert the branches in them, the ends cut.
- In order for the mechanism to earn, it is necessary to tie stick with rubber bands and tighten tight.
- We establish the bait - the neck of the thread and stretch it so that in the open state it can get to the bottom, you cut off, tie a small loop.
- Next, we ride on a piece of wire, put on the bottom, and the end we take out and engage the rope loop.
How the system works - the rat pulls over the bagel, the wire breaks down from the loop, the thread breaks down and the trap slams. The further fate of the "prisoners" depends completely from you, but better of course, take a trap with a rodent into a clean field and let go.
0
2553
