The art of origami allows you to create not just beautiful and multidimensional animal figures or birds. If you want to spend time for a simple and noisy entertainment - then paper flappers are designed specifically for you. Their manufacturing requires just a couple of minutes, a sheet of fine paper A4 and a bit of perfection. Paper slappers are deafening and completely safe. The simplest of them can be used on change, for entertainment, on holidays, as well as to annoy the neighbors.
1
The sheet of paper for the flap should not be dense. The best newspaper or a notebook sheet is suitable, and still coated paper of any color. Before starting work, the paper sheet needs to be smoothed on a flat surface, then folded fourwise and re-deploy. A pair of folds will appear on it, one of which will be longer than the other. Bend four corners of the sheet to the longer fold line. If you feel it easier, then the corners need to be folded in the form of "house". Now the resulting configuration is lowered along the longest fold line, having received something like a trapezium. Further turning its corners accurately to the middle, having received something like a square, which consists of two triangles.
2
This square should be folded in half in such a way that the paper triangles are inside. They will make cotton when triggered clappers. Its creation approached the end. So that the paper clap earned in the desired way, it takes it for the sharp edge and shake sharply, waving it from top to bottom. After that, she will crack and slammer. After the "explosion", it can be returned to the original state again and use how much you need, while the paper does not break. Sometimes paper products happen "drying", and they do not make loud cotton. In order for such a flap to work again, it will be necessary to relax a fixing element at the bottom. Also, it is also not necessary to smooth it too much so as not to prevent the fallout of the clapping part from the fixing element.
3
There is another way to create paper crap. It slaps otherwise louder than the usual one. In addition, cotton sounds not during the wave, when contacting paper with the surface. So, proceed to the manufacture. First you need to find a sheet of loose paper with a length of twenty centimeters and twenty-eight width. If there is no such, then the usual notebook, escaped from the middle, only cotton in this case will be quieter. Place this sheet horizontally, measure the bottom of five centimeters on both sides of the sheet and wrap it by making a shorter on this length. Remelude the same amount again and repaid already the resulting portion. You will have another 5 cm of not curved paper. If there is a little less - not scary.
4
Now it's time to fold the paper in half along. Do it carefully that the fold came out smooth. Remember that you need to bend the sheet inside, and not out. Holding a sheet behind the edges of a non-curved part of the paper, pull down until they deviate slightly below the raised edges. Upstairs will stick out a small triangle of not yet curved paper, and the slappers should turn out two pockets, shape resembling the edge of the diamond. Take for this little protruding triangle free paper. Do not squeeze your hand too much. It remains lightly slamming the resulting clapboard on the table, letting it with a non-bellged edge. It will create a clapping effect that can be strengthened by placing two paper "pockets".
Paper clappers are a favorite attraction of children. Their creation will not only take for a long time a restless baby, but will help him break a small motorcy and fantasy.
0
2401
