How to make an apple tree

How to make an apple tree

In the garden, the apple tree grows in the garden, and you still have not collected a crop? In this case, time to instill a tree from a plant with delicious fruits. You do not have to grow a new tree and acquire expensive varieties.

1
To instill an apple tree, take a sharp knife. By complexity, manipulation can be compared with the surgical operation, be careful and do not miss an important trifle. First, decide with the vaccination time. In the spring, you can put an apple tree with a cutting of another variety. If you want to instill a kidney tree, you have to wait until the summer.

How to make an apple tree

2
Prepare cuttings for vaccination is needed after the first frosts. At this time, the plant is preparing for winter and "falls into the hibernation". For cutting, take a very sharp knife. Please note that only young annual branches growing up can be used as a lead. The cutter area should be three times larger than the diameter of the twig. Do not forget to remove the top of the cutter. As a result, you will get a 30-35 cm shoot. Store cutlets are needed in the basement, loading the twig into the box with sawdust or sand. If you do not have a basement or cellar, wrap the trim in a wet fabric and put in the refrigerator.

How to make an apple tree

3
Forgot to prepare a brought from the fall? You can make it in the spring. When the kidneys are swollen on the branch, you can proceed to the preparation of the cutter. Be sure to wash your hands before manipulating, do not touch the cuts without need. It is desirable that the diameter of the twigs of the lead and the stock was equal. In this case, the fire will pass quickly. It is necessary that oblique cuts coincide with each other as a mosaic particles. The branch on the apple tree should be cut directly before vaccination. If you prepare a tree in advance, perhaps the place of cut will oxidize, and the fire will take place for a long time. It is possible to drop the location of the cut.

How to make an apple tree

4
What if the diameter of the branches is different? In this case, use the Corre's Vaccination Method. For this, the branch of the apple tree and with the help of a knife, clean the cut. Now a sharp knife move away in the upper part of the Cora's hemp and insert a stalk into this place. It is necessary that the cutting of the branches and the plot under the crust are tightly in contact. Remember, the cuttings can not be inserted into the lower part of the branch.

How to make an apple tree

5
It doesn't matter which method you use, the main thing is that it will be tightly docked with the lead and dilution. After manipulation, tightly tie the place of vaccinations with a plastic film. If the diameters of the branches differ greatly, you can make a sharp knife into the apple tree and insert a cutting into it. Before grafting it needs to be prepared. On both sides of the wire, remove the bark so that the location of the cut is rectangular.

How to make an apple tree

Note, it is impossible to use a heating agent for the strapping. Due to the presence of glue, the glue and the dive is stratum well. On top of the polyethylene film, apply a layer of oil paint or olifa. These substances prevent the release of cut. Try to take the place of vaccinations 2-3 times. A very thick layer of film contributes to the rapid blown of the kidneys. 2-3 weeks after the vaccination, you can send a little bandage. When the kidneys dissolve, remove the strapping. Instead of olifa, you can use garden var.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close