How to connect the dishwasher yourself

Dishwasher in our day passes from the category of "mechtatelnogo- unattainable" in everyday used daily kitchen equipment, preserving precious time and nerves hostess. But to determine the appropriate model and place dishwashers location is not enough. You can turn to professionals, but you can manually set a new technique.

For proper installation of the dishwasher with your hands you need to put it in place, "permanent bases". If the equipment built or detached a large amount, then the unevenness in the floor of the room to align the level of technique, using wriggle legs dishwasher where necessary to unscrew more or less.

The drain hose of the dishwasher is connected to the riser sink or drain discharge pipe. The connection is made using special fittings - tee, which cuts up the siphon to prevent dirty waste water sucked back into the dishwasher. More insurance against ingress of muddy water is desirable to install a check valve for a drain hose or to bend and fix the hose in such a position that the waste water is not flowed backward.

Water supply hose connect the tee-fitting to a water pipe. If the dishwasher is located at a great distance from the water supply, it can be a separate branch from the water pipe, using a shut-off valve and a tee or samovrezayuschiysya fitting with a crane. Now in stores plumbing, you can choose any material for the construction of branches: Plastic, metal and plastic, and others.

If the hose, two, remember that blue hose is connected to the cold water, and red - to hot. Match the size of the tap fittings and nuts on the water supply hose.

It requires a thorough cleaning of the water pipes in the ground, which will direct tie-fittings. It is necessary to remove the layer of old paint and clean tube section wire wool for a tight fitting to the pipe connection. If the sidebar in the water supply pipe is used plastic, then crashed fitting plastic consists of two pieces for each side of the pipe: outer - press bush increased rigidity is put on top of the pipe, the interior of which has a special thread for better wrap of the pipe on a tee. Thread enters the tube without Narrowed wall material, protecting it from mechanical occurrence of cracks. The outer part without tight seal is placed on the portion of the pipe, which already holds within the thread. Tighten the outer part of the fitting is necessary before the typical cod well anchored material. Pay close attention to the correctness of the outer part of the fitting location.

To operate the dishwasher you need not only the right connection pipes drain and water supply, but also to connect to electricity. Standard sockets are above the kitchen work surface. To connect the power of the dishwasher, it is desirable to make a living from the main outlet socket, making an additional socket, located in a convenient location.

Self installing the dishwasher is easy to give to the owner, who knows or has a great desire to get acquainted with the basics of electrical and plumbing. Rave reviews from our guests and the hostess will be the best reward for the successful completion of the task.